B-Line Eaton series panels and panel accessories, White powder coated, Wood, Wood back board, Panels and panel accessories, Wood back board, Type 1/ty

The 88 WB back board measures 8 x 8 x 8 inches as listed (height, width, and length/depth all 8 in), and it weighs about half a pound. That makes it a small-footprint mounting panel intended for an 8 x 8 inch enclosure interior rather than a full-size panelboard backplate.

Yes. The B-Line 88 WB wood back board is specified for Type 1 and Type 3R enclosures, so it is suitable inside a rainproof 3R box as well as an indoor general-purpose Type 1. It is a UL Listed component. Keep in mind wood, not steel, is the panel material, so it is a dielectric mounting surface rather than a bonded metallic one.

Wood gives you a non-conductive mounting surface you can drill and screw into anywhere without tapping, which is why electricians reach for it when landing terminal blocks, small relays, or control devices in a junction or pull box. Steel panels are the pick when you need a grounded, bonded metallic surface or heavier equipment support. The B-Line 88 WB is the wood option, white powder coated, sized 8 x 8 inches.

The 88 WB is supplied as the back board panel itself. Mounting hardware is not called out as included, so plan on using the enclosure's own panel mounting studs, brackets, or screws to secure it. At half a pound it needs no special support.

It arrives white powder coated, so no field finishing is needed. The white surface also makes wiring and labeling easier to read inside a dark enclosure.