You may also like
B-Line Eaton series runway accessories, Used to secure cable runway, Includes end supports, clamps and 5⁄16-18 hardware, Runway foot kit, ASTM A36 str
Model: BLN-SB2106A2YZ
Eaton B-Line series runway accessories, Used to secure cable runway, Includes end supports, clamps and 5⁄16-18 hardware, Runway foot kit, ASTM A36 structural steel, Yellow zinc
B-LINE
$183.44
$157.75
B-Line Eaton series runway accessories, Used to secure cable runway, Includes end supports, clamps and hardware, Runway foot kit, ASTM A36 structural
Model: BLN-SB2106B2YZ
Eaton B-Line series runway accessories, Used to secure cable runway, Includes end supports, clamps and hardware, Runway foot kit, ASTM A36 structural steel, Yellow zinc
B-LINE
$179.74
$154.36
B-Line Eaton series runway accessories, Used to secure cable runway, Includes end supports, clamps and 5⁄16-18 hardware, Runway foot kit, structural s
Model: BLN-SB2106AYZ
Eaton B-Line series runway accessories, Used to secure cable runway, Includes end supports, clamps and 5⁄16-18 hardware, Runway foot kit, structural steel, Yellow zinc finish
B-LINE
$166.93
$139.09
B-Line SB2106A2BZ Eaton series runway accessories, Used to secure cable runway, Includes end supports, clamps and 5?16-18 hardware, Runway foot kit, ASTM A36 structural steel, Black zinc
Model: BLN-SB2106A2BZ
Eaton B-Line series runway accessories, Used to secure cable runway, Includes end supports, clamps and 5?16-18 hardware, Runway foot kit, ASTM A36 structural steel, Black zinc
B-LINE
$183.44
$157.75
B-Line Eaton series runway accessories, Used to secure cable runway, Includes end supports, clamps and 5?16-18 hardware, Runway foot kit, ASTM A36 str
Model: BLN-SB2106BBZ
Eaton B-Line series runway accessories, Used to secure cable runway, Includes end supports, clamps and 5?16-18 hardware, Runway foot kit, ASTM A36 structural steel, Black zinc finish
B-LINE
$179.36
$154.36
Eaton B-Line series runway accessories, Used to secure cable runway, Includes end supports, clamps and 5⁄16-18 hardware, Runway foot kit, ASTM A36 structural steel, Yellow zinc finish
Manufacturer Resources
Product Specs
- Application:
- Used to secure cable runway
- Certifications:
- UL Listed
- Material Details:
- Yellow zinc ASTM A36 steel
- Product Height:
- 1.5 in
- Product Length Depth:
- 6.5 in
- Product Weight:
- 2.6 lb
- Product Width:
- .62 in
- Special Features:
- Includes end supports, clamps and 5⁄16-18 hardware
- Department:
- Electrical
- Product Type:
- Runway foot kit
- Product Details:
- Runway foot kit
- Product Length:
- 6.5 in
B-LINE SB2106BYZ – Frequently Asked Questions
1) What does the B-Line SB2106BYZ runway foot kit include, or do I need to buy hardware separately?
The SB2106BYZ kit ships with the end supports, the clamps, and the 5/16-18 hardware needed to fasten the runway down. You are not sourcing bolts separately for the runway-to-foot connection. What the kit does not include is the floor anchors, since those depend on whether you are going into concrete slab, raised floor, or a housekeeping pad.
2) Is the SB2106BYZ runway foot kit UL Listed for an inspected electrical install?
Yes, the SB2106BYZ carries a UL Listing, which is what an inspector or a spec-driven institutional job usually wants to see on cable support components. No other rating is claimed for it.
3) What is the B-Line SB2106BYZ actually used for in a data center or telecom room?
It is a runway foot kit, the floor-mounted base that anchors the end of a cable runway (ladder rack) so the run is supported off the slab rather than hung entirely from the wall or ceiling. Typical use is at the termination of a runway beside a rack lineup or where a run starts away from a wall.
4) Will the yellow zinc finish on this B-Line runway foot hold up, and can I use it outdoors?
The foot is ASTM A36 structural steel with a yellow zinc finish. Yellow zinc is a plating intended for dry indoor service, so keep it to equipment rooms, telecom closets, and data halls. For exterior or damp locations, specify a hot dip galvanized runway support instead.
5) Is the SB2106BYZ a single part number, or do I have to pick a size or finish?
One configuration only. SB2106BYZ is the yellow zinc version of the runway foot kit, and there is no size, length, or finish option to select when ordering it. Order by that Eaton B-Line part number and you get the same kit every time, which makes it easy to standardize across multiple closets.
6) What thread size are the bolts in the B-Line SB2106BYZ kit?
The supplied hardware is 5/16-18. Worth knowing if you are mixing in field-cut splices or adding clamps later, because you will want to stay on the same 5/16-18 thread rather than introducing a second wrench size across the lineup.
How fast can I get the B-LINE SB2106BYZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB2106BYZ come with a warranty?
Absolutely. The B-LINE SB2106BYZ is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB2106BYZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB2106BYZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.