Eaton B-Line series runway pan, Used to provide support for cables in runway, Pans can be trimmed to fit in field, Cable runway pan, Aluminum brushed finish
Manufacturer Resources
Product Specs
- Application:
- Used to provide support for cables in runway
- Certifications:
- UL Listed
- Material Details:
- Aluminum
- Product Height:
- .032 in
- Product Length Depth:
- 121 in
- Product Weight:
- 10.5 lb
- Product Width:
- 22.25 in
- Special Features:
- Pans can be trimmed to fit in field
- Department:
- Electrical
- Product Group:
- Wiring Accessories
- Product Subgroup:
- Cable Accessories
- Product Type:
- Cable runway pan
- Product Details:
- Cable runway pan
- Product Length:
- 121 in
B-LINE SB1924AL – Frequently Asked Questions
1) Can the SB1924AL runway pan be cut down on site?
Yes. Eaton B-Line builds this pan to be trimmed to fit in the field, which is how you handle short runs, offsets around columns, or a final piece at the end of a run without ordering a special length.
2) What does a cable runway pan actually do in a data or telecom room?
The pan lays into the ladder runway and provides a continuous surface so cables are supported along their whole length instead of only where they cross the rungs. That matters for small-diameter copper and fiber jumpers, which can sag or take a sharp bend between widely spaced rungs.
3) Is the SB1924AL pan aluminum or steel, and what is the finish?
Aluminum, in a brushed finish. That keeps the weight down for an overhead run and matches the look of standard aluminum ladder runway in a telecom room.
4) Is the Eaton B-Line SB1924AL runway pan UL Listed?
Yes, the SB1924AL is UL Listed, which is what most facility and institutional specs call for on cable support components in a telecom or equipment room.
5) How thick is the material on the SB1924AL runway pan?
The pan is formed from .032 inch aluminum. It is a light-gauge liner meant to spread cable bearing across the runway, not a structural tray, so the runway stringers and their supports still carry the load.
6) How heavy is a single B-Line SB1924AL runway pan for overhead installation?
Each pan weighs 10.5 lb. At 121 inches long that is a two-man lift to set overhead comfortably, but it adds very little dead load to the runway itself.
How fast can I get the B-LINE SB1924AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB1924AL come with a warranty?
Absolutely. The B-LINE SB1924AL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB1924AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB1924AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.