B-Line EL32T76GRST Eaton serie...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$5,721.00
Image coming soon

B-Line EL32T76GRST Eaton series single meter sockets, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, 010 kAIC, #6-250 MCM, MCB, Galvanized steel, Surface mount, 5 jaws, 1 position, 1Ø/3W, Overhead feed

(No reviews yet) Write a Review

Model: EL32T76GRST

In Stock (leaves warehouse same day if ordered before 3pm ET)

$5,721.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series single meter sockets, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, 010 kAIC, #6-250 MCM, MCB, Galvanized steel, Surface mount, 5 jaws, 1 position, 1Ø/3W, Overhead feed

Manufacturer Resources

Product Specs

Amperage Rating:
320A
Bypass:
Lever
Certifications:
UL
Cover Door Type:
Ringless
Degree Of Protection:
3R
Line Lug Size:
3/8”-16 Stud
Load Lug Size:
3/8”-16 Stud
Mounting Method:
Surface mount
Number Of Jaws:
7
Number Of Positions:
1
Number Of Wires:
3Ø/4W
Product Height:
39.13 in
Product Length Depth:
7.125 in
Product Weight:
53.121 lb
Product Width:
20.25 in
Special Features:
Overhead and underground feed
Department:
Electrical
Product Finish:
ANSI 61 gray paint
Product Material:
Galvanized steel

B-LINE EL32T76GRST – Frequently Asked Questions

1) Can the B-Line EL32T76GRST meter socket be mounted outdoors on an exterior wall?
Yes. The EL32T76GRST carries a 3R degree of protection, which is the rain-tight rating used for outdoor service equipment, and the enclosure is galvanized steel finished in ANSI 61 gray paint. It is a surface mount unit, so it lands flat on the wall or meter board rather than flush into it.
2) Does this Eaton B-Line meter socket work with an underground service lateral, or only an overhead drop?
Both. The EL32T76GRST is built for overhead and underground feed, so the same enclosure serves a weatherhead drop or a lateral coming up from below. That decides where you punch the hub or conduit opening, not which unit you order.
3) How do the line and load conductors terminate in the EL32T76GRST socket?
Line and load both land on 3/8-16 studs rather than a screw-type mechanical lug. That means you need ring-tongue compensators or lugs drilled for a 3/8 inch stud on each conductor, torqued to the nut. Contractors used to landing bare copper under a setscrew lug should order the terminal hardware to match before the service call.
4) Does this meter socket have a bypass so the meter can be pulled without dropping power?
It has a lever bypass. The utility or the electrician throws the lever to carry load around the meter, so the meter can be pulled or changed with the customer still energized. Many utilities require a lever bypass on larger residential and commercial services, so check the serving utility's approved equipment list.
5) Can I meter two tenants from this one Eaton B-Line socket?
No. The EL32T76GRST is a single position socket, one meter only. For two or more tenants on one service you need a multi-position meter stack or a separate socket per tenant, not this enclosure.
6) How much wall space do I need for the EL32T76GRST meter socket, and is it a one-man lift?
Plan the meter board around 39.13 x 20.25 x 7.125 inches, and expect about 53.121 lb of enclosure before any conductors are landed. That weight plus the height means most crews set it with two people or a temporary ledger while the mounting fasteners go in.
7) Is the B-Line EL32T76GRST a UL listed meter socket?
Yes, the EL32T76GRST is UL certified. For a property manager or facility buyer standardizing service equipment across a portfolio, that is the listing your inspector will look for on the label at rough-in.
8) What is the exact part number and brand for this gray 3R surface mount meter socket?
Eaton B-Line series, part number EL32T76GRST. That is the number to quote to a distributor or put on a submittal; the EL prefix family covers the ringless, bypass-equipped sockets in painted galvanized steel.
How fast can I get the B-LINE EL32T76GRST delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE EL32T76GRST come with a warranty?
Absolutely. The B-LINE EL32T76GRST is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE EL32T76GRST?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE EL32T76GRST from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!