Eaton B-Line series strut back-to-back welded channel, 1.62" channel height, 120" channel length, 1.62" channel width, Steel, 14 Gauge, B24 channel type, DURA GREEN
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Channel Type:
- B24
- Material Gauge:
- 14 Gauge
- Product Height:
- 1.62 in
- Product Length Depth:
- 120 in
- Product Weight:
- 28.84 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Finish:
- DURA GREEN
- Product Material:
- Steel
B-LINE B24A-120GRN – Frequently Asked Questions
1) Will standard 1-5/8 inch strut nuts and fittings fit the B-Line B24A-120GRN?
Yes. The B24 channel is the 1-5/8 in profile (listed as 1.62 in wide and 1.62 in high), which is the standard strut dimension that common 1-5/8 in channel nuts, spring nuts, post bases, and pipe clamps are built for. Ordering fittings sized for 1-5/8 in strut will land correctly on this piece.
2) What does back-to-back welded channel mean on the B24 strut, and when would I use it instead of a single channel?
Back-to-back welded means two channel sections joined along their backs so the open slots face opposite directions. That gives you a stiffer member for longer spans and trapeze runs, and lets you mount strut nuts and clamps on both faces, which is what you want for double rows of conduit or pipe. For a short single run of conduit against a wall, a single-face channel is the lighter and cheaper choice. The B24A-120GRN is the 1.62 in square, 14 gauge steel version.
3) Is DURA GREEN finish okay for a damp or corrosive environment?
DURA GREEN is Eaton B-Line's coated finish on the steel B24 channel, aimed at environments where plain painted strut would rust out, such as wash-down areas, water and wastewater plants, and parking structures. It is a coating over steel, not stainless, so for continuous submersion or heavy chemical exposure you should be specifying stainless or fiberglass channel instead.
4) Does the B24A-120GRN strut come with nuts, bolts, or mounting hardware?
No. The B24A-120GRN is supplied as the bare 120 in back-to-back welded channel only. Channel nuts, threaded rod, beam clamps, end caps, splice plates, and any pipe or conduit clamps are ordered separately, so take them off your takeoff list before the truck leaves.
5) What part number do I order for 10 ft green back-to-back B-Line strut?
Order Eaton B-Line part number B24A-120GRN. That designation covers the B24 back-to-back welded channel, 14 gauge steel, 120 in long, in the DURA GREEN finish.
6) Can this strut be cut to length on site?
Yes, the 120 in steel channel can be cut down with a bandsaw or chop saw like any 14 gauge strut. Cut ends leave the DURA GREEN coating broken, so touch them up with a cold galvanizing or matching coating if the run is in a damp or corrosive location, otherwise the cut is where it will start to rust.
How fast can I get the B-LINE B24A-120GRN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B24A-120GRN come with a warranty?
Absolutely. The B-LINE B24A-120GRN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B24A-120GRN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B24A-120GRN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.