B-Line B32SH-120HDG Eaton seri...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$107.74
$77.16
Image coming soon

B-Line B32SH-120HDG Eaton series strut channel, 1.37" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, SH hole pattern, B32 channel type, Hot-dipped galvanized

(No reviews yet) Write a Review

Model: B32SH-120HDG

In Stock (leaves warehouse same day if ordered before 3pm ET)

$107.74
$77.16
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut channel, 1.37" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, SH hole pattern, B32 channel type, Hot-dipped galvanized

Manufacturer Resources

Product Specs

Certifications:
Not Applicable
Channel Type:
B32
Hole Pattern:
SH
Material Gauge:
12 Gauge
Product Height:
1.37 in
Product Length Depth:
120 in
Product Weight:
16.2 lb
Product Width:
1.62 in
Department:
Electrical
Product Finish:
Hot-dipped galvanized
Product Material:
Steel
Product Length:
120 in

B-LINE B32SH-120HDG – Frequently Asked Questions

1) Is the B-Line B32SH strut channel solid back or slotted?
The B32SH carries the SH hole pattern, so the back of the channel is punched with holes rather than left solid. That lets you bolt the channel flat to a wall, deck, or structural steel through the back without field drilling. If you need an unpunched back for a continuous run, SH is the wrong suffix.
2) What are the actual cross-section dimensions of B-Line B32 channel?
B32 channel measures 1.62 in wide by 1.37 in tall. The 1-5/8 nominal width means standard 1-5/8 strut nuts, clamps, and fittings seat in the open face; the 1.37 in height is the shallow profile, roughly half the depth of a full 1-5/8 x 1-5/8 section, so verify your fitting depth and nut travel before mixing profiles.
3) Can B32SH-120HDG strut be used outdoors or in a wet area?
Yes. The steel channel is hot-dipped galvanized, which is the heavier zinc coating used for exterior, rooftop, parking structure, and washdown locations. Pre-galvanized (electro-zinc) strut is the indoor-dry alternative. Cut ends expose bare steel, so field cuts should be touched up with a cold galvanizing compound.
4) Will standard 1-5/8 strut nuts and fittings fit B-Line B32 channel?
The open face is 1.62 in, the standard 1-5/8 strut opening, so 1-5/8 spring nuts, channel nuts, pipe clamps, and beam clamps engage the inturned lips normally. What changes with B32 is depth: at 1.37 in tall it is a shallower section than a 1-5/8 x 1-5/8 channel, so deep-throat fittings and long bolt tails may bottom out.
5) What gauge is B-Line B32 strut and how heavy is a 10 foot stick?
It is 12 gauge steel, the standard structural thickness for 1-5/8 strut, and a full 120 in length weighs 16.2 lb. That is a one-hand carry for a single stick, but plan lifting and overhead handling accordingly when you are running a bundle up a ladder.
6) What exact part number do I order for B-Line 12 gauge 10 foot hot-dip galvanized strut with back holes?
Order Eaton B-Line part number B32SH-120HDG. The suffixes read across as B32 channel type, SH hole pattern, 120 in length, HDG for hot-dipped galvanized. Swapping any one of those changes the part, so a solid-back or pre-galvanized version is a different number.
How fast can I get the B-LINE B32SH-120HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B32SH-120HDG come with a warranty?
Absolutely. The B-LINE B32SH-120HDG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B32SH-120HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B32SH-120HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!