Eaton B-Line series strut channel, 1.62" channel height, 240" channel length, 1.62" channel width, Steel, 12 Gauge, K06 Hole pattern, B22 channel type, Pre-galvanized
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Channel Type:
- B22
- Hole Pattern:
- K06
- Material Gauge:
- 12 Gauge
- Product Height:
- 1.62 in
- Product Length Depth:
- 240 in
- Product Weight:
- 38 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Finish:
- Pre-galvanized
- Product Material:
- Steel
B-LINE B22KO6-240GLV – Frequently Asked Questions
1) Is pre-galvanized strut channel okay for outdoor or wet locations?
Pre-galvanized (GLV) steel is a mill-coated finish intended for dry interior and normally protected locations. The zinc is thin at the cut ends and at punched holes, so for exterior exposure, corrosive process areas, or wash-down spaces you want hot-dip galvanized or stainless strut rather than this pre-galvanized B22.
2) Will standard 1-5/8 inch strut nuts, clamps and fittings fit B-Line B22?
Yes. B22 is the 1.62 inch wide, 1.62 inch deep profile, which is the standard 1-5/8 inch strut opening, so spring nuts, channel nuts, pipe clamps, and beam clamps sized for 1-5/8 inch strut seat in it. Note the fittings and hardware are separate items; the channel ships as bare strut only.
3) Is B22 back-to-back strut or a single channel?
B22 is a single channel with a 1.62 by 1.62 inch section in 12 gauge steel, not a welded back-to-back assembly. If your drawing calls for a doubled section for longer unsupported spans or trapeze runs, you need a back-to-back channel instead of this one.
4) What does the KO6 hole pattern on this strut channel mean for mounting?
The KO6 hole pattern means the back of the channel is pre-punched on a repeating series rather than left solid, so you can bolt the strut directly to studs, joists, or concrete anchors without field drilling. Pick your anchor spacing off the punched holes; if you need an unpunched back for a continuous slotted run, order a plain-back B22 instead.
5) What is the exact part number to order for 20 foot B-Line 12 gauge strut?
Order B-Line B22KO6-240GLV. That breaks down as B22 channel type, KO6 hole pattern, 240 inch length, GLV pre-galvanized finish, in 12 gauge steel.
How fast can I get the B-LINE B22KO6-240GLV delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B22KO6-240GLV come with a warranty?
Absolutely. The B-LINE B22KO6-240GLV is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B22KO6-240GLV?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B22KO6-240GLV from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.