You may also like
B-Line B11S-120HDG Eaton series strut channel, 3.25" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, S hole pattern, B11 channel type, Hot-dipped galvanized
Model: BLN-B11S-120HDG
Eaton B-Line series strut channel, 3.25" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, S hole pattern, B11 channel type, Hot-dipped galvanized
B-LINE
$204.25
$181.36
B-Line Eaton series strut channel, 3.25" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, SH hole pattern, B11 channel type,
Model: BLN-B11SH-120YZN
Eaton B-Line series strut channel, 3.25" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, SH hole pattern, B11 channel type, Yellow zinc chromate
B-LINE
$13,926.35
B-Line B11SH-120GRN Eaton series strut channel, 3.25" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, SH hole pattern, B11 channel type, DURA GREEN
Model: BLN-B11SH-120GRN
Eaton B-Line series strut channel, 3.25" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, SH hole pattern, B11 channel type, DURA GREEN
B-LINE
$158.99
$127.63
B-Line B24SH-120HDG Eaton series strut channel, 1.62" channel height, 120" channel length, 1.62" channel width, Steel, 14 Gauge, SH hole pattern, B24 channel type, Hot-dipped galvanized
Model: BLN-B24SH-120HDG
Eaton B-Line series strut channel, 1.62" channel height, 120" channel length, 1.62" channel width, Steel, 14 Gauge, SH hole pattern, B24 channel type, Hot-dipped galvanized
B-LINE
$86.06
$42.78
B-Line B32SH-120HDG Eaton series strut channel, 1.37" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, SH hole pattern, B32 channel type, Hot-dipped galvanized
Model: BLN-B32SH-120HDG
Eaton B-Line series strut channel, 1.37" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, SH hole pattern, B32 channel type, Hot-dipped galvanized
B-LINE
$107.74
$67.18
Eaton B-Line series strut channel, 3.25" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, SH hole pattern, B11 channel type, Hot-dipped galvanized
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Channel Type:
- B11
- Hole Pattern:
- SH
- Material Gauge:
- 12 Gauge
- Product Height:
- 3.25 in
- Product Length Depth:
- 120 in
- Product Weight:
- 29.7 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Finish:
- Hot-dipped galvanized
- Product Material:
- Steel
B-LINE B11SH-120HDG – Frequently Asked Questions
1) Is B-Line B11SH-120HDG strut channel rated for outdoor or wet locations?
The B11SH-120HDG is hot-dipped galvanized steel, which is the finish you use for exterior runs, parking structures, wash-down areas and other damp or corrosive environments. Plain or pre-galvanized channel is the indoor choice; hot-dip is the heavier coating applied after fabrication, so cut ends are the only spot needing field touch-up.
2) What size is B-Line B11 strut channel, and is it the deep 1-5/8 inch style?
B11 is the deeper profile: 3.25 inches high by 1.62 inches wide, which is the standard 1-5/8 inch strut opening on a double-height back-to-back style section. Standard shallow channel is about 1-5/8 by 1-5/8, so B11 gives you roughly twice the depth for longer unsupported spans while still taking the same 1-5/8 inch strut nuts and fittings. Each stick runs 120 inches.
3) What does the SH hole pattern mean on B-Line strut channel?
SH is the slotted-hole pattern, so the channel comes punched along its length rather than solid. That lets you bolt fittings, brackets and threaded rod straight through the back of the channel without field drilling, and it cuts weight against a solid-back stick. If your detail calls for an unpunched back, SH is the wrong pattern.
4) What exact part number do I order to match existing B-Line deep strut on my job?
The part is B-Line B11SH-120HDG from Eaton. Read it as: B11 profile, SH slotted holes, 120 inch length, HDG hot-dipped galvanized. If the existing run on your building is B11 but plain or pre-galvanized, the profile and fittings still match; only the coating differs.
How fast can I get the B-LINE B11SH-120HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B11SH-120HDG come with a warranty?
Absolutely. The B-LINE B11SH-120HDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B11SH-120HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B11SH-120HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.