Eaton B-Line series strut channel, .81" channel height, 120" channel length, 1.62" channel width, Steel, 14 Gauge, SH hole pattern, B54 channel type, Stainless steel type 304
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Channel Type:
- B54
- Hole Pattern:
- SH
- Material Gauge:
- 14 Gauge
- Product Height:
- .81 in
- Product Length Depth:
- 120 in
- Product Weight:
- 9.1 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Finish:
- Stainless steel type 304
- Product Material:
- Steel
- Product Length:
- 120 in
B-LINE B54SH-120SS4 – Frequently Asked Questions
1) Is the B-Line B54SH strut channel actually stainless steel, or just a stainless-look finish?
The B54SH-120SS4 is type 304 stainless steel. That is the material of the channel itself, not a coating, which is why it gets specified for wet, washdown, coastal, and corrosive areas where plain pre-galvanized strut rusts out. Base material is listed as steel in 14 gauge.
2) What does the SH hole pattern mean on this B-Line strut?
SH is slotted holes punched through the back of the channel, so you can bolt the stick to structure or thread all-thread through it anywhere along the run without field drilling. If you want a solid back for a cleaner look or maximum section, that is the plain (no-hole) version of B54 instead. The B54SH-120SS4 is punched.
3) Should I use B54 shallow strut or full 1-5/8 inch deep channel for a pipe trapeze?
Shallow B54 at .81 inches deep is for lighter runs, conduit, small pipe, cable tray supports, and wall mounting where you do not have the clearance for deep channel. For heavier trapeze loads or longer unsupported spans, step up to the full 1-5/8 by 1-5/8 inch profile. The fittings are interchangeable since both share the 1.62 inch width.
4) Do the nuts, bolts, and fittings come with this strut channel?
No. The B54SH-120SS4 is the bare channel only, a single 120 inch stick. Channel nuts, spring nuts, clamps, end caps, and connecting brackets are ordered separately, and on a 304 stainless run you generally want stainless hardware too so you are not mixing a rusting fastener into a corrosion-resistant support.
5) Can I cut this stainless strut to length on site?
Yes. It ships as a 120 inch stick in 14 gauge stainless and cuts with a bandsaw or abrasive chop saw. Use stainless-appropriate blades and deburr the cut, and on 304 in a corrosive area keep the cut end and any carbon steel tooling debris off it so you do not seed surface rust.
6) What is the exact part number to order this Eaton B-Line shallow stainless strut?
Order B-Line B54SH-120SS4. That breaks down as B54 channel type, SH punched hole pattern, 120 inch length, and SS4 for type 304 stainless.
How fast can I get the B-LINE B54SH-120SS4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B54SH-120SS4 come with a warranty?
Absolutely. The B-LINE B54SH-120SS4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B54SH-120SS4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B54SH-120SS4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.