You may also like
B-Line Eaton series strut channel, nuts, all threaded rod, Steel, Channel nuts, Nut without spring, Electro-plated zinc, 250 lbs pull out strength, 45, 100 Pack
Model: BLN-N223ZN
Eaton B-Line series strut channel, nuts, all threaded rod, Steel, Channel nuts, Nut without spring, Electro-plated zinc, 250 lbs pull out strength, 450 lbs slip strength, 5/16"-18 thread size
B-LINE
$781.99
Eaton B-Line series strut channel, nuts, all threaded rod, Steel, Channel nuts, Nut without spring, Electro-plated zinc, 250 lbs pull out strength, 100 lbs slip strength, 10"-32 thread size
Manufacturer Resources
Product Specs
- Bolt Thread Rod Size:
- 10"-32
- Certifications:
- Not Applicable
- Load Rating Pull Out Strength:
- 250 lbs
- Load Rating Slip Strength:
- 100 lbs
- Product Category:
- Channel nuts
- Product Height:
- .85 in
- Product Length Depth:
- 1.75 in
- Product Weight:
- .07 lb
- Product Width:
- 1.375 in
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- Nut without spring
- Product Finish:
- Electro-plated
- Product Details:
- Nut without spring
- Product Material:
- Steel
B-LINE N227ZN – Frequently Asked Questions
1) What thread size does the B-Line N227ZN channel nut take?
The N227ZN takes 10-32 threaded fasteners, so it pairs with 10-32 machine screws or threaded rod. Anything larger, such as 1/4-20 or 3/8-16, needs a different channel nut in the series.
2) Is the N227ZN a spring nut or a plain channel nut?
It is a nut without spring. There is no spring to hold it in position while you thread the bolt, so you have to support it by hand in the channel during install. If you are working overhead alone, a spring nut version is easier to handle; the plain nut is fine where you can reach both sides or the run is at working height.
3) Will a B-Line N227ZN channel nut rust in a damp mechanical room?
The nut is steel with an electro-plated zinc finish. That suits dry indoor use, mechanical rooms and conditioned spaces. For exterior, wash-down or corrosive environments, specify a hot dip galvanized or stainless channel nut instead.
4) Does the B-Line N227ZN come with a bolt or washer?
No. The N227ZN is the channel nut alone. You order the 10-32 screws or threaded rod, and any washers or clamps, separately.
5) Can I hang threaded rod from a B-Line N227ZN nut for conduit or pipe support?
Yes, with 10-32 rod, and keep the hung load within 250 lbs pull out. For the heavier rod sizes normally used on pipe hangers (3/8 in and up), choose the matching larger-thread channel nut rather than this one.
6) Which B-Line part number should I order to standardize strut nuts across a facility?
Order by model N227ZN. That single designation covers the steel, zinc electro-plated, 10-32, spring-free channel nut, so a facility standardizing hardware can spec one number for all light-duty strut connections.
How fast can I get the B-LINE N227ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE N227ZN come with a warranty?
Absolutely. The B-LINE N227ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE N227ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE N227ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.