You may also like
B-Line B116-32ZN Eaton series strut fittings and accessories, 1.37" Height, 5.43" Length, 1.62" Width, .84lbs, Steel, Three hole u support, Thickness 1/4 in, Fits channel type 32, Electro-plated
Model: BLN-B116-32ZN
Eaton B-Line series strut fittings and accessories, 1.37" Height, 5.43" Length, 1.62" Width, .84lbs, Steel, Three hole u support, Thickness 1/4 in, Fits channel type 32, Electro-plated
B-LINE
$136.35
$101.78
B-Line B116-32AZN Eaton series strut fittings and accessories, 2.74" Height, 5.43" Length, 1.62" Width, .84lbs, Steel, Three hole u support, Thickness 1/4 in, Fits channel type 32, Electro-plated
Model: BLN-B116-32AZN
Eaton B-Line series strut fittings and accessories, 2.74" Height, 5.43" Length, 1.62" Width, .84lbs, Steel, Three hole u support, Thickness 1/4 in, Fits channel type 32, Electro-plated
B-LINE
$141.55
$108.56
B-Line B116-42ZN Eaton series strut fittings and accessories, 1" Height, 5.43" Length, 1.62" Width, .84lbs, Steel, Three hole u support, Thickness 1/4 in, Fits channel type 42, Electro-plated
Model: BLN-B116-42ZN
Eaton B-Line series strut fittings and accessories, 1" Height, 5.43" Length, 1.62" Width, .84lbs, Steel, Three hole u support, Thickness 1/4 in, Fits channel type 42, Electro-plated
B-LINE
$111.28
$72.94
B-Line Eaton series strut fittings and accessories, 1.37" Height, 5.43" Length, 1.62" Width, .84lbs, Steel, Three hole u support, Thickness 1/4 in, Fi
Model: BLN-B116-32GRN
Eaton B-Line series strut fittings and accessories, 1.37" Height, 5.43" Length, 1.62" Width, .84lbs, Steel, Three hole u support, Thickness 1/4 in, Fits channel type 32, DURA GREEN
B-LINE
$10,737.34
B-Line B116-12ZN Eaton series strut fittings and accessories, 2.43" Height, 5.43" Length, 1.62" Width, 1.08lbs, Steel, Three hole u support, Thickness 1/4 in, Fits channel type 12, Electro-plated
Model: BLN-B116-12ZN
Eaton B-Line series strut fittings and accessories, 2.43" Height, 5.43" Length, 1.62" Width, 1.08lbs, Steel, Three hole u support, Thickness 1/4 in, Fits channel type 12, Electro-plated
B-LINE
$141.01
$108.56
Eaton B-Line series strut fittings and accessories, 1.37" Height, 5.43" Length, 1.62" Width, .84lbs, Steel, Three hole u support, Thickness 1/4 in, Fits channel type 32, Stainless steel type 304
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- For Channel Type:
- Fits channel type 32
- Material Gauge:
- 1/4"
- Product Height:
- 1.37 in
- Product Length Depth:
- 5.43 in
- Product Weight:
- .84 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Supports
- Product Type:
- Three hole u support
- Product Finish:
- Stainless steel type 304
- Product Details:
- Three hole u support
- Product Material:
- Steel
B-LINE B116-32SS4 – Frequently Asked Questions
1) What channel does the B-Line B116-32SS4 three hole U support fit?
The B116-32SS4 is made for Eaton B-Line channel type 32. It will not seat correctly on other channel profiles, so match the channel designation stamped on your strut before ordering.
2) Is the B116-32SS4 U support stainless, and is it suitable for a wet or corrosive area?
It's Type 304 stainless steel, which is the grade specified for damp, washdown, and outdoor runs where plated or pre-galvanized fittings would rust out. For chloride-heavy environments such as coastal or pool chemical rooms, 316 is the usual step up.
3) What are the overall dimensions of the B116-32SS4 support?
It measures 5.43 inches length/depth, 1.62 inches width, and 1.37 inches height. Worth checking the 1.37 inch height against your clearance if the fitting sits between the channel and a wall or deck.
4) Do bolts or channel nuts come with the B116-32SS4 U support?
The B116-32SS4 is the U support fitting only. Hardware to fasten it, channel nuts and bolts, is ordered separately, and on a Type 304 run you'll want stainless fasteners so you aren't mixing plated steel into a corrosion-resistant assembly.
5) What is a three hole U support used for in a strut system?
It's a U-shaped strut fitting with three bolt holes, used to tie channel to channel or to bracket conduit, pipe, and equipment runs off a strut framework. Eaton B-Line part B116-32SS4 is the Type 32 channel, 304 stainless version of that fitting.
6) Is B116-32SS4 the full manufacturer part number to order?
Yes. B116-32SS4 is the Eaton B-Line manufacturer part number, and it's a single configuration: three hole U support, 1/4 inch material, Type 32 channel, 304 stainless. There's no finish or size choice to specify on top of it.
How fast can I get the B-LINE B116-32SS4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B116-32SS4 come with a warranty?
Absolutely. The B-LINE B116-32SS4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B116-32SS4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B116-32SS4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.