You may also like
B-Line Eaton series strut fittings and accessories, 1.62" Height, 1.62" Length, 1.62" Width, .18lbs, Steel, Square washer, Hole size 7/16 in diameter
Model: BLN-B201SS4
Eaton B-Line series strut fittings and accessories, 1.62" Height, 1.62" Length, 1.62" Width, .18lbs, Steel, Square washer, Hole size 7/16 in diameter | Bolt size 3/8 in, Stainless steel type 304
B-LINE
$3,041.66
$11.90
B-Line Eaton series strut fittings and accessories, 1.62" Height, 1.62" Length, 1.62" Width, .18lbs, Steel, No twisr square washer, Hole size 7/16 in
Model: BLN-B201DYZN
Eaton B-Line series strut fittings and accessories, 1.62" Height, 1.62" Length, 1.62" Width, .18lbs, Steel, No twisr square washer, Hole size 7/16 in diameter | Bolt size 3/8 in, Yellow zinc chromate
B-LINE
$1,985.30
B-Line Eaton series strut fittings and accessories, 1.62" Height, 1.62" Length, 1.62" Width, .18lbs, Aluminium, Square washer, Hole size 7/16 in diame
Model: BLN-B201AL
Eaton B-Line series strut fittings and accessories, 1.62" Height, 1.62" Length, 1.62" Width, .18lbs, Aluminium, Square washer, Hole size 7/16 in diameter | Bolt size 3/8 in, Aluminum
B-LINE
$1,611.37
B-Line Eaton series strut fittings and accessories, 1.62" Height, 1.62" Length, 1.62" Width, .18lbs, Steel, Square washer, Hole size 3/8 in diameter |
Model: BLN-B200HDG
Eaton B-Line series strut fittings and accessories, 1.62" Height, 1.62" Length, 1.62" Width, .18lbs, Steel, Square washer, Hole size 3/8 in diameter | Bolt size 5/16 in, Hot-dipped galvanized
B-LINE
$1,611.37
B-Line Eaton series strut fittings and accessories, 1.62" Height, 1.62" Length, 1.62" Width, .18lbs, Aluminium, Square washer, Hole size 3/8 in diamet
Model: BLN-B200AL
Eaton B-Line series strut fittings and accessories, 1.62" Height, 1.62" Length, 1.62" Width, .18lbs, Aluminium, Square washer, Hole size 3/8 in diameter | Bolt size 5/16 in, Aluminum
B-LINE
$1,611.37
Eaton B-Line series strut fittings and accessories, 1.62" Height, 1.62" Length, 1.62" Width, .18lbs, Steel, Square washer, Hole size 7/16 in diameter, Bolt size 3/8 in, Hot-dipped galvanized
Manufacturer Resources
Product Specs
- Bolt Thread Rod Size:
- 3/8"
- Certifications:
- Not Applicable
- Product Height:
- 1.62 in
- Product Length Depth:
- 1.62 in
- Product Weight:
- .18 lb
- Product Width:
- 1.62 in
- Special Features:
- Hole size 7/16 in diameter
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- Square washer
- Product Finish:
- Hot-dipped galvanized
- Product Details:
- Square washer
- Product Material:
- Steel
B-LINE B201HDG – Frequently Asked Questions
1) What size is the B201HDG square washer, and will it cover the face of 1-5/8 inch strut?
It measures 1.62 x 1.62 x 1.62 inches, so its footprint matches the 1-5/8 inch face of standard strut channel and bears across the full width rather than digging into the lips. Each washer weighs .18 lb, useful if you are figuring hardware weight on a large hanger package.
2) Is the B-Line B201HDG square washer OK for outdoor or wet locations?
It is steel with a hot-dipped galvanized finish, which is the coating B-Line uses for exterior, rooftop, and damp interior runs. For indoor dry environments an electro-galvanized washer is the usual cheaper choice; specify HDG where the strut run sees weather.
3) What is a square washer used for on a strut installation?
A square washer spreads the bolt load across the channel face when you are bolting through strut, through a beam clamp, or sandwiching a fitting. Round washers can roll into the channel opening; the flat square body of the B201HDG sits across it. It is a load-distributing washer only, not a channel nut, so you still need a spring nut or strut nut to make the connection.
4) Is the B201HDG washer threaded, or do I need a strut nut with it?
Unthreaded. The 7/16 inch hole is a clearance hole for a 3/8 inch bolt, so it slips over the bolt and you thread into a channel nut or a hex nut behind it. Order the nuts separately.
5) What exact part number do I order for the B-Line hot-dipped galvanized 3/8 inch square washer?
The part is Eaton B-Line B201HDG. The HDG suffix is the hot-dipped galvanized finish; it is the only configuration offered under that number, so there are no finish or size options to specify.
How fast can I get the B-LINE B201HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B201HDG come with a warranty?
Absolutely. The B-LINE B201HDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B201HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B201HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.