You may also like
B-Line B105SS4 Eaton series strut fittings and accessories, 1.62" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Offset size 1-5/8 in, Three hole z-support, Thickness 1/4 in, Fits channel type B22, Stainless steel type 304
Model: BLN-B105SS4
Eaton B-Line series strut fittings and accessories, 1.62" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Offset size 1-5/8 in, Three hole z-support, Thickness 1/4 in, Fits channel type B22,...
B-LINE
$143.33
$125.37
B-Line B105SS6 Eaton series strut fittings and accessories, 1.62" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Offset size 1-5/8 in, Three hole z-support, Thickness 1/4 in, Fits channel type B22, Stainless steel type 316
Model: BLN-B105SS6
Eaton B-Line series strut fittings and accessories, 1.62" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Offset size 1-5/8 in, Three hole z-support, Thickness 1/4 in, Fits channel type B22,...
B-LINE
$227.60
B-Line B105YZN Eaton series strut fittings and accessories, 1.62" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Offset size 1-5/8 in, Three hole z-support, Thickness 1/4 in, Fits channel type B22, Yellow zinc chromate
Model: BLN-B105YZN
Eaton B-Line series strut fittings and accessories, 1.62" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Offset size 1-5/8 in, Three hole z-support, Thickness 1/4 in, Fits channel type B22, Yellow...
B-LINE
$82.68
$44.36
B-Line B105HDG Eaton series strut fittings and accessories, 1.62" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Offset size 1-5/8 in, Three hole z-support, Thickness 1/4 in, Fits channel type B22, Hot-dipped galvanized
Model: BLN-B105HDG
Eaton B-Line series strut fittings and accessories, 1.62" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Offset size 1-5/8 in, Three hole z-support, Thickness 1/4 in, Fits channel type B22,...
B-LINE
$89.27
$52.09
B-Line Eaton series strut fittings and accessories, 1.62" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Offset size 1-5/8 in, Three hole z-support,
Model: BLN-B105GRN
Eaton B-Line series strut fittings and accessories, 1.62" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Offset size 1-5/8 in, Three hole z-support, Thickness 1/4 in, Fits channel type B22, DURA...
B-LINE
$4,066.04
Eaton B-Line series strut fittings and accessories, 1.62" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Offset size 1-5/8 in, Three hole z-support, Thickness 1/4 in, Fits channel type B22, Electro-plated
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- For Channel Type:
- Fits channel type B22
- Material Gauge:
- 1/4"
- Product Height:
- 1.62 in
- Product Length Depth:
- 3.5 in
- Product Weight:
- .51 lb
- Product Width:
- 1.62 in
- Special Features:
- Offset size 1-5/8 in
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Supports
- Product Type:
- Three hole z-support
- Product Finish:
- Electro-plated
- Product Details:
- Three hole z-support
- Product Material:
- Steel
B-LINE B105ZN – Frequently Asked Questions
1) What channel does the B-Line B105ZN z-support fit?
The B105ZN three hole z-support is made for Eaton B-Line B22 channel. B22 is the 1-5/8 inch wide, 3-1/4 inch deep back-to-back profile, so if your run is B22 strut this fitting lands on it as intended. On other channel widths or single-height 1-5/8 inch deep strut, the hole pattern and offset will not line up the same way.
2) What does the 1-5/8 inch offset on the B105ZN z-support actually do on a job?
The offset is what makes it a z-support: the fitting steps the connection over by 1-5/8 inch, which is one full channel width. That lets you tie two runs of strut together side by side, or bring a support back to a wall or beam face without the two pieces fighting for the same plane. If you need a flat, in-plane splice instead, a straight plate fitting is the right part, not this one.
3) Can I use the B105ZN z-support outdoors or in a damp area?
The B105ZN comes electro-plated, which is a thin zinc coating meant for dry indoor service. Mechanical rooms, ceiling spaces and indoor conduit racks are where it belongs. For exterior work, wash-down areas, parking structures or corrosive environments, move up to a hot-dip galvanized or stainless version of the same fitting instead.
4) What is the exact part number to order this Eaton B-Line z-support under?
Order it as B-Line B105ZN. The ZN suffix is the electro-plated zinc finish; the same body in another finish carries a different suffix, so quote the full B105ZN when you are matching fittings already installed on a run.
How fast can I get the B-LINE B105ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B105ZN come with a warranty?
Absolutely. The B-LINE B105ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B105ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B105ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.