You may also like
B-Line Eaton series strut fittings and accessories, 1.95" Height, 6.50" Length, 1.62" Width, .77lbs, Steel, Four hole open angle, 30 deg, Thickness 1/
Model: BLN-B246SS4
Eaton B-Line series strut fittings and accessories, 1.95" Height, 6.50" Length, 1.62" Width, .77lbs, Steel, Four hole open angle, 30 deg, Thickness 1/4 in, Stainless steel type 304
B-LINE
$26,620.23
B-Line B246GRN Eaton series strut fittings and accessories, 1.95" Height, 6.50" Length, 1.62" Width, .77lbs, Steel, Four hole open angle, 30 deg, Thickness 1/4 in, DURA GREEN
Model: BLN-B246GRN
Eaton B-Line series strut fittings and accessories, 1.95" Height, 6.50" Length, 1.62" Width, .77lbs, Steel, Four hole open angle, 30 deg, Thickness 1/4 in, DURA GREEN
B-LINE
$113.49
$84.87
B-Line B246ZN Eaton series strut fittings and accessories, 1.95" Height, 6.50" Length, 1.62" Width, .77lbs, Steel, Four hole open angle, 30 deg, Thickness 1/4 in, Electro-plated
Model: BLN-B246ZN
Eaton B-Line series strut fittings and accessories, 1.95" Height, 6.50" Length, 1.62" Width, .77lbs, Steel, Four hole open angle, 30 deg, Thickness 1/4 in, Electro-plated
B-LINE
$110.47
$81.01
B-Line B248HDG Eaton series strut fittings and accessories, 2.70" Height, 6.03" Length, 1.62" Width, .77lbs, Steel, Four hole open angle, 45 deg, Thickness 1/4 in, Hot-dipped galvanized
Model: BLN-B248HDG
Eaton B-Line series strut fittings and accessories, 2.70" Height, 6.03" Length, 1.62" Width, .77lbs, Steel, Four hole open angle, 45 deg, Thickness 1/4 in, Hot-dipped galvanized
B-LINE
$132.82
$111.87
B-Line B250HDG Eaton series strut fittings and accessories, 3.32" Height, 5.35" Length, 1.62" Width, .77lbs, Steel, Four hole open angle, 60 deg, Thickness 1/4 in, Hot-dipped galvanized
Model: BLN-B250HDG
Eaton B-Line series strut fittings and accessories, 3.32" Height, 5.35" Length, 1.62" Width, .77lbs, Steel, Four hole open angle, 60 deg, Thickness 1/4 in, Hot-dipped galvanized
B-LINE
$132.82
$111.87
Eaton B-Line series strut fittings and accessories, 1.95" Height, 6.50" Length, 1.62" Width, .77lbs, Steel, Four hole open angle, 30 deg, Thickness 1/4 in, Hot-dipped galvanized
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Material Gauge:
- 1/4"
- Product Height:
- 1.95 in
- Product Length Depth:
- 6.5 in
- Product Weight:
- .77 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Type:
- Four hole open angle, 30 deg
- Product Finish:
- Hot-dipped galvanized
- Product Details:
- Four hole open angle, 30 deg
- Product Material:
- Steel
- Product Length:
- 6.5 in
B-LINE B246HDG – Frequently Asked Questions
1) What is the B-Line B246HDG strut fitting used for?
The B246HDG is a four hole open angle fitting bent at 30 degrees, used to join two runs of strut channel at an angled connection rather than a square one. Two holes sit on each leg, so each side of the angle takes two channel bolts for a fixed, non-pivoting joint. It is 1/4 inch thick steel, 6.5 in overall length, 1.95 in height, 1.62 in width.
2) Can the B246HDG angle fitting be used outdoors or in a wet area?
The finish is hot-dipped galvanized, which is the coating B-Line specifies for outdoor, damp, and corrosive-duty strut runs. That makes it suitable for rooftop mechanical supports, exterior conduit racks, parking structures, and wash-down areas where a plain or electro-galvanized fitting would rust at the cut edges.
3) Is a 30 degree open angle fitting the right choice, or do I need an adjustable angle connector?
Pick the B246HDG when the angle on the drawing is a fixed 30 degrees. Because the bend is formed into the 1/4 inch steel and each leg is drilled with two holes, the joint cannot rotate once bolted, which is what you want on a braced or load-carrying connection. If the angle varies in the field or has to be set on site, use an adjustable or swivel-type strut connector instead, which pivots on a single fastener per leg.
4) Do channel bolts and nuts come with the B246HDG angle bracket?
No. The B246HDG ships as the bare four hole 30 degree angle only. You order the strut nuts, channel bolts, and washers separately, and for an exterior run match them to the hot-dipped galvanized finish of the fitting so you do not create a mixed-metal corrosion point at the fastener.
5) What part number do I order for the Eaton B-Line hot-dip galvanized 30 degree four hole angle?
Order it as B246HDG from Eaton's B-Line series. The HDG suffix is the hot-dipped galvanized version of the B246 angle; the base number without that suffix is a different finish, so use the full designation on the purchase order.
6) Is the B246HDG thick enough for structural strut bracing, or is it a light-duty bracket?
At 1/4 inch steel it is in the heavy fitting range, not a light formed clip. Combined with two bolts per leg, it is the type used for braced and load-bearing angled connections in pipe, conduit, and mechanical support racks rather than for light trim work.
How fast can I get the B-LINE B246HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B246HDG come with a warranty?
Absolutely. The B-LINE B246HDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B246HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B246HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.