You may also like
B-Line B129PAZN Eaton series strut fittings and accessories, .23" Height, 3.5" Length, 1.62" Width, .37lbs, Steel, Two hole splice plate | Pre assembled, Thickness 1/4 in, Electro-plated
Model: BLN-B129PAZN
Eaton B-Line series strut fittings and accessories, .23" Height, 3.5" Length, 1.62" Width, .37lbs, Steel, Two hole splice plate | Pre assembled, Thickness 1/4 in, Electro-plated
B-LINE
$76.83
$32.23
B-Line Eaton series strut fittings and accessories, .23" Height, 3.5" Length, 1.62" Width, .37lbs, Steel, Two hole splice plate, Thickness 1/4 in, Ele
Model: BLN-B129ZN
Eaton B-Line series strut fittings and accessories, .23" Height, 3.5" Length, 1.62" Width, .37lbs, Steel, Two hole splice plate, Thickness 1/4 in, Electro-plated
B-LINE
$2,015.41
B-Line Eaton series strut fittings and accessories, .23" Height, 3.5" Length, 1.62" Width, .37lbs, Steel, Two hole splice plate, Thickness 1/4 in, Yel
Model: BLN-B129YZN
Eaton B-Line series strut fittings and accessories, .23" Height, 3.5" Length, 1.62" Width, .37lbs, Steel, Two hole splice plate, Thickness 1/4 in, Yellow zinc chromate
B-LINE
$2,317.13
B-Line Eaton series strut fittings and accessories, .23" Height, 3.5" Length, 1.62" Width, .37lbs, Steel, Two hole splice plate, Thickness 1/4 ", Hot-
Model: BLN-B129HDG
Eaton B-Line series strut fittings and accessories, .23" Height, 3.5" Length, 1.62" Width, .37lbs, Steel, Two hole splice plate, Thickness 1/4 ", Hot-dipped galvanized
B-LINE
$2,810.39
B-Line Eaton series strut fittings and accessories, .23" Height, 3.5" Length, 1.62" Width, .37lbs, Steel, Two hole splice plate, Thickness 1/4 in, DUR
Model: BLN-B129GRN
Eaton B-Line series strut fittings and accessories, .23" Height, 3.5" Length, 1.62" Width, .37lbs, Steel, Two hole splice plate, Thickness 1/4 in, DURA GREEN
B-LINE
$2,122.20
Eaton B-Line series strut fittings and accessories, .23" Height, 3.5" Length, 1.62" Width, .37lbs, Steel, Two hole splice plate | Pre assembled, Thickness 1/4 in, DURA GREEN
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Material Gauge:
- 1/4"
- Product Height:
- .23 in
- Product Length Depth:
- 3.5 in
- Product Weight:
- .37 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Group:
- Panels & Plates
- Product Subgroup:
- Plates
- Product Type:
- Two hole splice plate,Pre assembled
- Product Finish:
- DURA GREEN
- Product Details:
- Two hole splice plate,Pre assembled
- Product Material:
- Steel
B-LINE B129PAGRN – Frequently Asked Questions
1) What is the B-Line B129PAGRN two hole splice plate used for?
It is a flat steel splice plate that joins two lengths of strut channel end to end, bolting through two holes into the channel nuts. The plate measures 3.5 x 1.62 x .23 inches and weighs .37 lb, and it ships pre-assembled, so the hardware comes with the plate rather than being ordered separately.
2) Do I need to buy channel nuts and bolts separately for this splice plate?
No. The B129PAGRN is supplied pre-assembled, meaning the fastening hardware comes with the plate. You order one part number rather than a plate plus loose nuts and bolts, which is worth knowing when you are pulling a kit list for a run of strut supports.
3) Will the 1.62 inch width sit flat on standard 1-5/8 inch strut channel?
Yes. At 1.62 inches wide the plate matches the 1-5/8 inch face of standard strut channel, so it seats flush across the channel without overhang. 1-5/8 inch is the common strut width in commercial electrical and mechanical work.
4) What does the DURA GREEN finish on this B-Line splice plate mean for outdoor or damp installs?
DURA GREEN is B-Line's coated finish rather than plain mill steel, so the plate is intended for service where corrosion is a concern, such as damp interiors and mechanical rooms. The base material underneath is steel. If your spec calls for hot dip galvanized or stainless strut hardware, DURA GREEN is a different finish and should not be substituted without checking the drawing.
5) Is a two hole splice plate enough to join strut, or do I need a four hole plate?
A two hole plate like the B129PAGRN puts one bolt in each channel at the joint, which suits light to moderate continuation splices where the connection is supported close by. For a joint carrying bending load at mid-span, or where the run has to act as a continuous beam, a four hole or a longer splice plate spreads the load over more of the channel. The plate is only 3.5 inches long, so there is limited bolt spacing to resist rotation.
6) What exact part number should I order for the green two hole strut splice plate?
Order Eaton B-Line B129PAGRN. That is the pre-assembled two hole splice plate in 1/4 inch steel with the DURA GREEN finish.
How fast can I get the B-LINE B129PAGRN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B129PAGRN come with a warranty?
Absolutely. The B-LINE B129PAGRN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B129PAGRN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B129PAGRN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.