You may also like
B-Line B232SS4 Eaton series strut fittings and accessories, 3.93" Height, 1.87" Length, 1.62" Width, .56lbs, Steel, Three hole corner angle, 90 deg | Pre assembled, Stainless steel type 304
Model: BLN-B232SS4
Eaton B-Line series strut fittings and accessories, 3.93" Height, 1.87" Length, 1.62" Width, .56lbs, Steel, Three hole corner angle, 90 deg | Pre assembled, Stainless steel type 304
B-LINE
$138.79
$119.59
B-Line Eaton series strut fittings and accessories, 3.93" Height, 1.87" Length, 1.62" Width, .56lbs, Steel, Three hole corner angle, 90 deg | Pre asse
Model: BLN-B232HDG
Eaton B-Line series strut fittings and accessories, 3.93" Height, 1.87" Length, 1.62" Width, .56lbs, Steel, Three hole corner angle, 90 deg | Pre assembled, Hot-dipped galvanized
B-LINE
$4,976.47
B-Line B232PAGRN Eaton series strut fittings and accessories, 3.93" Height, 1.87" Length, 1.62" Width, .56lbs, Steel, Three hole corner angle, 90 deg | Pre assembled, DURA GREEN
Model: BLN-B232PAGRN
Eaton B-Line series strut fittings and accessories, 3.93" Height, 1.87" Length, 1.62" Width, .56lbs, Steel, Three hole corner angle, 90 deg | Pre assembled, DURA GREEN
B-LINE
$98.97
$65.59
B-Line B232PAZN Eaton series strut fittings and accessories, 3.93" Height, 1.87" Length, 1.62" Width, .56lbs, Steel, Three hole corner angle, 90 deg | Pre assembled, Electro-plated
Model: BLN-B232PAZN
Eaton B-Line series strut fittings and accessories, 3.93" Height, 1.87" Length, 1.62" Width, .56lbs, Steel, Three hole corner angle, 90 deg | Pre assembled, Electro-plated
B-LINE
$98.51
$65.59
B-Line Eaton series strut fittings and accessories, 3.93" Height, 1.87" Length, 1.62" Width, .56lbs, Steel, Three hole corner angle, 90 deg, Electro-p
Model: BLN-B232ZN
Eaton B-Line series strut fittings and accessories, 3.93" Height, 1.87" Length, 1.62" Width, .56lbs, Steel, Three hole corner angle, 90 deg, Electro-plated
B-LINE
$3,616.61
Eaton B-Line series strut fittings and accessories, 3.93" Height, 1.87" Length, 1.62" Width, .56lbs, Steel, Three hole corner angle, 90 deg | Pre assembled, Stainless steel type 316
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 3.93 in
- Product Length Depth:
- 1.87 in
- Product Weight:
- .56 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Group:
- Lighting
- Product Subgroup:
- LED Modules
- Product Type:
- Three hole corner angle, 90 deg,Pre assembled
- Product Finish:
- Stainless steel type 316
- Product Details:
- Three hole corner angle, 90 deg,Pre assembled
- Product Material:
- Steel
B-LINE B232SS6 – Frequently Asked Questions
1) What is the B-Line B232SS6 strut fitting used for?
It's a three hole corner angle that joins strut at 90 degrees, and it ships pre assembled. Use it where two runs of channel meet in a corner and you need a bolted right angle connection rather than a welded one. Eaton part number B232SS6.
2) Is the B232SS6 corner angle stainless steel, and can it go outdoors or in a wash-down area?
The finish is stainless steel type 316, the marine grade normally specified for coastal, wet, and chemical wash-down environments. Base material is listed as steel. For exterior racking, pool and water treatment rooms, or food processing areas, a 316 fitting is what you'd pair with 316 channel and 316 hardware so you don't set up galvanic problems in the joint.
3) Does the B232SS6 come with the bolts and channel nuts I need to mount it?
No. The B232SS6 is supplied as a pre assembled three hole corner angle fitting only. Channel nuts, bolts, and washers are ordered separately, and in a 316 application you'll want them in 316 as well so the whole joint matches.
4) How many bolt holes does the B232SS6 angle have, and how does that affect the connection?
Three holes. That gives you two fastening points on one leg and one on the other (or the reverse, depending on how you orient it), so the corner resists rotation better than a two hole flat angle. For a plain right angle tie between two channels where twist isn't a concern, a smaller two hole angle fitting does the job with less material.
How fast can I get the B-LINE B232SS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B232SS6 come with a warranty?
Absolutely. The B-LINE B232SS6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B232SS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B232SS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.