You may also like
B-Line Eaton series strut fittings and accessories, 5.37" Height, 3.5" Length, 1.62" Width, 1.175lbs, Steel, Flat four hole tee gusset plate, Thicknes
Model: BLN-B136GRN
Eaton B-Line series strut fittings and accessories, 5.37" Height, 3.5" Length, 1.62" Width, 1.175lbs, Steel, Flat four hole tee gusset plate, Thickness 1/4 in, DURA GREEN
B-LINE
$11,018.93
B-Line B136ZN Eaton series strut fittings and accessories, 5.37" Height, 3.5" Length, 1.62" Width, 1.175lbs, Steel, Flat four hole tee gusset plate, Thickness 1/4 in, Electro-plated
Model: BLN-B136ZN
Eaton B-Line series strut fittings and accessories, 5.37" Height, 3.5" Length, 1.62" Width, 1.175lbs, Steel, Flat four hole tee gusset plate, Thickness 1/4 in, Electro-plated
B-LINE
$138.64
$105.16
B-Line B136SS4 Eaton series strut fittings and accessories, 5.37" Height, 3.5" Length, 1.62" Width, 1.175lbs, Steel, Flat four hole tee gusset plate, Thickness 1/4 in, Stainless steel type 304
Model: BLN-B136SS4
Eaton B-Line series strut fittings and accessories, 5.37" Height, 3.5" Length, 1.62" Width, 1.175lbs, Steel, Flat four hole tee gusset plate, Thickness 1/4 in, Stainless steel type 304
B-LINE
$314.35
$313.81
B-Line B142HDG Eaton series strut fittings and accessories, 3.5" Height, 5.37" Length, 3.5" Width, 1.02lbs, Steel, Flat four hole corner gusset plate | Pre assembled, Hot-dipped galvanized
Model: BLN-B142HDG
Eaton B-Line series strut fittings and accessories, 3.5" Height, 5.37" Length, 3.5" Width, 1.02lbs, Steel, Flat four hole corner gusset plate | Pre assembled, Hot-dipped galvanized
B-LINE
$165.24
$137.40
B-Line B135HDG Eaton series strut fittings and accessories, 3.5" Height, 3.5" Length, 1.62" Width, .765lbs, Steel, Flat three hole corner gusset plate, Thickness 1/4 in, Hot-dipped galvanized
Model: BLN-B135HDG
Eaton B-Line series strut fittings and accessories, 3.5" Height, 3.5" Length, 1.62" Width, .765lbs, Steel, Flat three hole corner gusset plate, Thickness 1/4 in, Hot-dipped galvanized
B-LINE
$103.88
$64.46
Eaton B-Line series strut fittings and accessories, 5.37" Height, 3.5" Length, 1.62" Width, 1.175lbs, Steel, Flat four hole tee gusset plate, Thickness 1/4 in, Hot-dipped galvanized
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Material Gauge:
- 1/4"
- Product Height:
- 5.37 in
- Product Length Depth:
- 3.5 in
- Product Weight:
- 1.175 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Flat four hole tee gusset plate
- Product Finish:
- Hot-dipped galvanized
- Product Details:
- Flat four hole tee gusset plate
- Product Material:
- Steel
B-LINE B136HDG – Frequently Asked Questions
1) Is the B-Line B136HDG gusset plate rated for outdoor or wet locations?
The B136HDG is hot-dipped galvanized steel, which is the finish used for outdoor, damp, and corrosive-duty strut runs. Rooftop, parking structure, tunnel, and exterior wall work are all typical for a HDG fitting. For dry indoor conditions a plain or electro-galvanized fitting is usually enough, but HDG is never wrong indoors.
2) Does the B136HDG plate come with the strut nuts and bolts to mount it?
No. The B136HDG ships as the flat four hole tee gusset plate only. You order channel nuts, bolts, and washers separately, four sets to fill the plate, sized to the bolt hole and matched in finish. On an exterior job pair the hot-dipped galvanized plate with galvanized or stainless hardware so you are not mixing dissimilar coatings at the joint.
3) Will the B136HDG work with 1-5/8 inch strut channel?
Yes. At 1.62 in wide the plate sits within the 1-5/8 in face of standard strut channel, which is the dimension B-Line strut fittings are built around. It bolts through the channel slot with standard strut nuts.
4) How thick is the B-Line B136HDG four hole tee plate steel?
Quarter inch steel. That thickness is what separates a gusset plate from a light flat splice plate: the gusset shape plus 1/4 inch stock is meant to stiffen a strut joint against racking rather than just hold two pieces in line. Total weight of the piece is 1.175 lb.
5) Should I use a flat tee gusset plate or a 90 degree angle fitting to join strut?
They solve different joints. A flat gusset plate like the B136HDG bolts across the face of two pieces of strut lying in the same plane, making a tee where both runs stay flat against the same surface. If your second run turns out of plane, off a wall or up from a ceiling, you need a right angle or post base fitting instead. The four hole pattern here gives you two fasteners in each leg, which is what keeps the tee from pivoting under load.
6) Is this the Eaton B-Line B136HDG, and what is the part number I order by?
Yes, this is Eaton's B-Line series strut fitting, ordered as part number B136HDG. The HDG suffix is the hot-dipped galvanized version of the B136 flat four hole tee gusset plate.
How fast can I get the B-LINE B136HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B136HDG come with a warranty?
Absolutely. The B-LINE B136HDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B136HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B136HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.