B-Line B183SHLZN Eaton series strut fittings and accessories, 5.93" Height, 22" Length, 1.62" Width, 3.17lbs, Steel, Left bracing slotted bracket, Thickness 1/4 in, Electro-plated

The B183SHLZN is a left bracing slotted bracket from the Eaton B-Line strut fittings line. It ties a diagonal brace into a strut run, and the slotted leg lets you slide the connection point rather than being locked to one fixed hole. It is a left-hand part, so if the brace lands on the opposite side of the run you need the matching right-hand bracket instead.

Six holes total: one 7/16 inch diameter round hole, plus four slots 1 inch long by 13/32 inch. The 7/16 inch round hole takes standard 3/8 inch strut hardware, and the 1 inch slots give you adjustment along the bracket so the brace angle does not have to be exact.

It measures 22 inches in length, 5.93 inches in height and 1.62 inches in width, and weighs 3.17 lb. The 22 inch leg is what lets it pick up a brace well out from the strut connection, so check you have that much clear run before committing to it on a tight ceiling space.

The B183SHLZN carries an electro-plated zinc finish, which is a dry indoor or protected-location finish. For exposed exterior, wet, or corrosive runs, specify a hot-dip galvanized or stainless brace fitting instead.

No. You are buying the bracket alone, a single steel left bracing slotted bracket. Channel nuts, bolts and washers to suit your strut profile are ordered separately, sized to the 7/16 inch hole and 13/32 inch slots in the bracket.

Order Eaton B-Line part number B183SHLZN. The ZN suffix on B-Line fittings denotes the electro-plated zinc finish, and the L in the designation marks it as the left-hand bracket.