You may also like
B-Line B166-52YZN Eaton series strut fittings and accessories, .81" Height, 7.24" Length, 1.68" Width, .71lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B52, B54, B56, Yellow zinc chromate
Model: BLN-B166-52YZN
Eaton B-Line series strut fittings and accessories, .81" Height, 7.24" Length, 1.68" Width, .71lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B52, B54, B56, Yellow zinc...
B-LINE
$136.84
$117.66
B-Line B166-46-52ZN Eaton series strut fittings and accessories, .81" Height, 7.24" Length, 1.68" Width, .61lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B22, B24, B26, Electro-plated
Model: BLN-B166-46-52ZN
Eaton B-Line series strut fittings and accessories, .81" Height, 7.24" Length, 1.68" Width, .61lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B22, B24, B26, Electro-plated
B-LINE
$151.84
$136.94
B-Line B166-42ZN Eaton series strut fittings and accessories, 1" Height, 7.24" Length, 1.68" Width, 0.75lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B42, Electro-plated
Model: BLN-B166-42ZN
Eaton B-Line series strut fittings and accessories, 1" Height, 7.24" Length, 1.68" Width, 0.75lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B42, Electro-plated
B-LINE
$131.77
$109.94
B-Line B166-46-12ZN Eaton series strut fittings and accessories, 2.43" Height, 7.24" Length, 1.68" Width, .98lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B12, Electro-plated
Model: BLN-B166-46-12ZN
Eaton B-Line series strut fittings and accessories, 2.43" Height, 7.24" Length, 1.68" Width, .98lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B12, Electro-plated
B-LINE
$198.67
B-Line B166-46-11ZN Eaton series strut fittings and accessories, 3.5" Height, 7.24" Length, 1.68" Width, 1.18lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B11, Electro-plated
Model: BLN-B166-46-11ZN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 7.24" Length, 1.68" Width, 1.18lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B11, Electro-plated
B-LINE
$229.53
Eaton B-Line series strut fittings and accessories, .81" Height, 7.24" Length, 1.68" Width, .71lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B52, B54, B56, Electro-plated
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- For Channel Type:
- Fits channel type B52, B54, B56
- Material Gauge:
- 7/32"
- Product Height:
- .81 in
- Product Length Depth:
- 7.24 in
- Product Weight:
- .71 lb
- Product Width:
- 1.68 in
- Special Features:
- 1 splice clevis, 1 B466Wplate,4 1/4-20 flat screws
- Department:
- Electrical
- Product Group:
- Connectors & Adapters
- Product Subgroup:
- Splice Components
- Product Type:
- Four hole splice clevis
- Product Finish:
- Electro-plated
- Product Details:
- Four hole splice clevis
- Product Material:
- Steel
B-LINE B166-52ZN – Frequently Asked Questions
1) Does the B166-52ZN splice clevis come with the hardware to install it, or do I need to order screws separately?
Everything for the joint ships together: 1 splice clevis, 1 B466W plate, and 4 1/4-20 flat screws. No extra fasteners needed to make the splice.
2) How thick is the steel on the B-Line B166-52ZN splice clevis?
It is steel at 7/32 inch thickness, with overall dimensions of 7.24 inches length, 1.68 inches width and .81 inch height, weighing .71 lb. The 7.24 inch length is what spans the joint and picks up two holes on each side of the splice.
3) Is the electro-plated finish on the B166-52ZN suitable for outdoor or wet locations?
The B166-52ZN carries an electro-plated (zinc) finish, which is intended for dry indoor service. For exterior runs, wash-down areas or corrosive environments, specify a hot-dip galvanized or stainless splice fitting instead.
4) What is a splice clevis used for on strut channel?
A splice clevis joins two lengths of strut end to end so a run can continue past a single stick. The B166-52ZN is the four hole version: it straddles the joint and takes two 1/4-20 screws into each channel through the supplied B466W plate, so load transfers across the splice rather than stopping at the cut end.
5) What is the exact part number to order for the B-Line four hole splice clevis that fits B52 channel?
Order Eaton B-Line part B166-52ZN. The ZN suffix is the electro-plated version, and it covers B52, B54 and B56 channel.
How fast can I get the B-LINE B166-52ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B166-52ZN come with a warranty?
Absolutely. The B-LINE B166-52ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B166-52ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B166-52ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.