Eaton B-Line series strut mounting bracket, Conduit and cable, 1" Height, 1" Length, 1" Width, 0.086lbs, Conduit size EMT: 0.5", Conduit strut clamps, .25" Min cable diameter, 0.68" Max cable diameter, 200 lbs load capacity, Pre-galvanized
Manufacturer Resources
Product Specs
- Cable Diameter Max:
- .68 in
- Cable Diameter Min:
- .25 in
- Certifications:
- UL/CUL listed
- Load Capacity:
- 200 lbs
- Product Category:
- Conduit and cable
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .086 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- Conduit strut clamps
- Product Size:
- Conduit size EMT: 0.5 inch
- Product Details:
- Conduit strut clamps
B-LINE B1508S – Frequently Asked Questions
1) Can the B1508S clamp be used to hold cable instead of EMT conduit?
Yes. Besides 1/2 inch EMT, it takes cable from .25 in up to .68 in diameter, so smaller MC, AC or control cable within that range clamps fine. Anything thicker than .68 in will not seat.
2) Is the B1508S strut clamp UL listed for electrical work?
It carries a UL/CUL listing, which is what most inspectors and institutional specs want to see on conduit support hardware.
3) How much weight will a B-Line B1508S conduit strut clamp hold?
Rated at 200 lbs load capacity. That is the clamp rating only; your support spacing and the strut, anchors and fasteners carrying it still govern the assembly.
4) What finish is the B1508S clamp and can I use it outdoors?
Pre-galvanized steel. That finish is intended for dry interior and protected locations. For wet exterior or corrosive areas, specify a hot dip galvanized or stainless clamp instead.
5) Does the B1508S conduit clamp mount to standard strut channel?
Yes, it is a strut mounting bracket for conduit and cable, so it attaches to strut channel rather than direct to a wall. Order a channel nut and bolt with it; the clamp is supplied as the bracket only.
6) How much space does one B1508S clamp take up on a strut run?
Each clamp measures 1 x 1 x 1 inch and weighs .086 lb, so you can space them tight on a multi-run strut without crowding, and a full box of them adds almost nothing to the load.
7) What is the exact part number to order for a 1/2 inch EMT Eaton B-Line strut clamp?
Eaton B-Line part number B1508S. That is the identifier to quote for the 1/2 inch EMT, pre-galvanized version.
How fast can I get the B-LINE B1508S delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B1508S come with a warranty?
Absolutely. The B-LINE B1508S is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B1508S?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B1508S from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.