B-Line B2031HDG Eaton series s...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$72.23
$30.86
B-Line B2031HDG Eaton series strut pipe clamps and accessories, .0677" height, 2.866" length, 1.25" width, 600 lbs, Steel, Include combination recess hex head machine screw, O.D pipe conduit clamp, Hot-dipped galvanized, 1/4"-20

B-Line B2031HDG Eaton series strut pipe clamps and accessories, .0677" height, 2.866" length, 1.25" width, 600 lbs, Steel, Include combination recess hex head machine screw, O.D pipe conduit clamp, Hot-dipped galvanized, 1/4"-20

(No reviews yet) Write a Review

Model: B2031HDG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$72.23
$30.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut pipe clamps and accessories, .0677" height, 2.866" length, 1.25" width, 600 lbs, Steel, Include combination recess hex head machine screw, O.D pipe conduit clamp, Hot-dipped galvanized, 1/4"-20

Manufacturer Resources

Product Specs

Bolt Pin Size:
1/4"-20
Certifications:
Not Applicable
Load Capacity:
600 lbs
Product Height:
.0677 in
Product Length Depth:
2.866 in
Product Weight:
.16 lb
Product Width:
1.25 in
Special Features:
Include combination recess hex head machine screw
Department:
Electrical
Product Group:
Conduit & Fittings
Product Subgroup:
Conduit Accessories
Product Type:
O.D pipe conduit clamp
Product Details:
O.D pipe conduit clamp
Product Material:
Steel

B-LINE B2031HDG – Frequently Asked Questions

1) How much load will the B-Line B2031HDG strut pipe clamp hold?
The B2031HDG carries a 600 lb load capacity. That is the clamp itself; the strut, the strut anchorage, and the building structure all have to be rated for the load too, and on a horizontal run the spacing of your supports is what determines the load each clamp actually sees.
2) Is the B2031HDG clamp suitable for outdoor or wet-location strut runs?
It is a hot-dipped galvanized steel clamp, so it is intended for exterior runs, parking structures, rooftop conduit racks, and damp interior areas where plain electro-galvanized hardware would rust out. Pair it with hot-dip galvanized strut and galvanized hardware so you are not mixing finishes on the same run.
3) What size bolt does the B-Line B2031HDG pipe clamp take, and is the screw included?
It uses 1/4"-20 hardware, and a combination recess hex head machine screw ships with the clamp. You still need the strut nut and spring for the channel unless you already stock them, since the clamp is supplied with the screw only.
4) Does the B2031HDG clamp size by pipe trade size or by outside diameter?
By outside diameter. It is an O.D. pipe conduit clamp, so you measure the actual outside diameter of the pipe or conduit you are strapping rather than calling out a nominal trade size. That matters when you are clamping tubing or a conduit type whose O.D. does not match the trade number on it.
5) What are the dimensions and weight of the B-Line B2031HDG strut clamp?
The clamp measures .0677 x 2.866 x 1.25 inches (height, length, width as published) and weighs .16 lb. The 1.25 inch width is the number to check against your strut face and against neighboring clamps if you are ganging several runs of conduit on one piece of channel.
6) Can I use the B2031HDG for plumbing pipe or is it electrical only?
Mechanically it is a steel O.D. clamp that mounts to strut with 1/4"-20 hardware, so it holds any pipe or tube whose outside diameter matches, not just conduit. B-Line catalogs it on the electrical side, and for copper domestic water you would normally want a clamp with isolation to avoid dissimilar metal contact.
7) What part number do I order for the hot-dip galvanized version of this Eaton B-Line strut pipe clamp?
Order Eaton B-Line B2031HDG. The HDG suffix is the hot-dipped galvanized finish; strip it and you are ordering a different finish of the same clamp body, so keep the suffix on the purchase order if the run is exterior.
How fast can I get the B-LINE B2031HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B2031HDG come with a warranty?
Absolutely. The B-LINE B2031HDG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B2031HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B2031HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!