B-Line Eaton series strut pipe...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$7,557.29
B-Line Eaton series strut pipe clamps and accessories, .0966" height, 7.000" length, 1.25" width, Steel, Safety factor of 5, Include combination reces

B-Line Eaton series strut pipe clamps and accessories, .0966" height, 7.000" length, 1.25" width, Steel, Safety factor of 5, Include combination reces

(No reviews yet) Write a Review

Model: B2059HDG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$7,557.29
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut pipe clamps and accessories, .0966" height, 7.000" length, 1.25" width, Steel, Safety factor of 5, Include combination recess, O.D pipe conduit clamp, Hot-dipped galvanized, 5/16 -18

Manufacturer Resources

Product Specs

Bolt Pin Size:
5/16"-18
Certifications:
Not Applicable
Product Height:
.0966 in
Product Length Depth:
7 in
Product Weight:
.68 lb
Product Width:
1.25 in
Special Features:
Safety factor of 5 Include combination recess
Department:
Electrical
Product Group:
Conduit & Fittings
Product Subgroup:
Conduit Accessories
Product Type:
O.D pipe conduit clamp
Product Details:
O.D pipe conduit clamp
Product Material:
Steel

B-LINE B2059HDG – Frequently Asked Questions

1) What size bolt does the B-Line B2059HDG strut pipe clamp take?
The B2059HDG clamp is threaded 5/16"-18, so it pairs with 5/16"-18 strut hardware (nuts, bolts, or channel nuts). If your existing strut assembly is running 3/8"-16 hardware, you'll need to change fasteners or pick a clamp threaded to match.
2) Is this B-Line pipe clamp rated for outdoor or wet locations?
It's hot-dipped galvanized steel, which is the finish specified for outdoor, damp, and corrosive-atmosphere runs. That makes it suitable for rooftop conduit, exterior walls, parking structures, and mechanical yards where a plain or electro-zinc clamp would rust out.
3) Does this clamp size to the pipe outside diameter or to trade size?
It's an O.D. pipe conduit clamp, meaning it's sized to the actual outside diameter of the pipe rather than a nominal trade size. Measure the O.D. of your conduit or pipe with calipers before ordering, since steel pipe and EMT of the same nominal size do not share the same O.D.
4) What is the safety factor on the B-Line B2059HDG strut clamp?
Load values for this clamp are published with a safety factor of 5, which is the standard basis B-Line uses for strut support components. For an engineer or inspector reviewing a hanger submittal, that means the allowable load already carries a 5:1 margin over ultimate.
5) How big is the B2059HDG clamp and how much does it weigh?
Published dimensions are 7 in length, 1.25 in width, and .0966 in height, at .68 lb each. The 7 inch length is what you need to check against your strut layout and adjacent trapeze members if runs are tight; the .68 lb per-piece weight is what to multiply out when totalling dead load on a hanger or estimating a bulk order.
6) Does the B-Line B2059HDG come with the strut nut and bolt?
Order the 5/16"-18 channel nut and bolt separately. The clamp is threaded 5/16"-18 to accept them, but the fastener and the strut channel itself are not part of the clamp.
7) What does the combination recess on this B-Line clamp do?
The clamp includes a combination recess, so a single part seats correctly against more than one profile rather than needing a dedicated clamp per condition. It's the feature that lets contractors standardize on fewer clamp part numbers across a job.
8) Can I use this clamp for plumbing or mechanical pipe, or is it electrical only?
Although it's catalogued for electrical conduit work, it's an O.D. pipe clamp in hot-dipped galvanized steel, so it mounts pipe as readily as conduit on a strut channel. MRO and mechanical crews use the same clamp family for water, gas, and process lines supported off strut, provided the pipe O.D. matches the clamp.
How fast can I get the B-LINE B2059HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B2059HDG come with a warranty?
Absolutely. The B-LINE B2059HDG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B2059HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B2059HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!