Eaton B-Line series strut pipe clamps and accessories, .0994" height, 4.072" length, 1.25" width, 800 lbs, Steel, Include combination recess hex head machine screw, Electro-plated zinc, 5/16"-18
Manufacturer Resources
Product Specs
- Bolt Pin Size:
- 5/16"-18
- Certifications:
- Not Applicable
- Load Capacity:
- 800 lbs
- Product Height:
- .0994 in
- Product Length Depth:
- 4.072 in
- Product Weight:
- .32 lb
- Product Width:
- 1.25 in
- Special Features:
- Include combination recess hex head machine screw
- Department:
- Electrical
- Product Material:
- Steel
B-LINE B2038PAZN – Frequently Asked Questions
1) How much weight can the B-Line B2038PAZN strut pipe clamp hold?
The B2038PAZN clamp is rated at 800 lbs load capacity. That covers most single-run pipe and conduit supports off strut, but it is a per-clamp figure, so spacing on a heavy run still has to be worked out against the total load on the channel.
2) What size bolt does the B-Line B2038PAZN pipe clamp take, and does the screw come with it?
It uses a 5/16-18 bolt, and the combination recess hex head machine screw is included with the clamp. You still need a strut nut and the channel itself; the clamp ships with the screw, not the channel hardware.
3) Is the B-Line B2038PAZN strut clamp suitable for damp or outdoor use?
It is steel with an electro-plated zinc finish. That is a general indoor and protected-area finish. For exposed exterior runs, coastal sites, or wash-down areas, step up to a hot-dip galvanized or stainless clamp instead.
4) Does the B-Line B2038PAZN pipe clamp carry a UL listing or other certification?
No listed certifications apply to this clamp; the certification field reads Not Applicable. If your spec calls for a listed support component, that requirement has to be met by a different part.
5) What are the dimensions and weight of the B-Line B2038PAZN clamp?
Stated dimensions are .0994 in height, 4.072 in length/depth and 1.25 in width, at .32 lb each. The 1.25 in width is the number to watch when you are spacing multiple clamps along a single length of strut.
6) Can I order just one B-Line strut pipe clamp or does it come as a kit?
The B2038PAZN is a single clamp model, supplied with its 5/16-18 combination recess hex head machine screw. Order the quantity you need for your hanger spacing; there is no multi-piece assembly kit involved.
How fast can I get the B-LINE B2038PAZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B2038PAZN come with a warranty?
Absolutely. The B-LINE B2038PAZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B2038PAZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B2038PAZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.