B-Line Eaton series strut pipe clamps and accessories, .104" height, 4.164" length, 1.25" width, Steel, Includes combination recess hex head machine s

The B2006SS4 is a Type 304 stainless steel strut pipe clamp. The spec table lists the material as steel, and the description specifies stainless steel type 304, so it's the corrosion-resistant grade normally used outdoors, in wash-down areas, and in damp mechanical rooms rather than a plated carbon steel clamp.

The screw is in the box. The B2006SS4 ships with a combination recess hex head machine screw, so the clamp and its fastener are one line item. You still need the strut channel and, depending on how you're mounting, a channel nut to receive the screw.

Pipe size isn't given as a nominal number on the B2006SS4 record, so go by the physical numbers instead: the clamp measures .104 x 4.164 x 1.25 inches. The 4.164 inch dimension is the overall run of the strap, which is what sets how far around the pipe it wraps, and .104 inch is the strap stock thickness. If you need a specific nominal pipe size confirmed, match those dimensions against the pipe OD you're supporting.

Yes. Being Type 304 stainless, the clamp is suited to exterior and rooftop conduit and pipe runs where a plated steel clamp would rust at the strap edges. Pair it with stainless strut and stainless channel nuts, otherwise the dissimilar plated hardware becomes the weak point in the assembly.

Order it as Eaton B-Line B2006SS4. That's the manufacturer part number for the Type 304 stainless clamp supplied with the combination recess hex head machine screw.

The B2006SS4 is a mechanical support clamp, and its record carries no listing or certification claim. Treat it as a structural support component for electrical and mechanical strut systems rather than a listed electrical device.

Each B2006SS4 clamp, screw included, weighs .33 lb. On a hundred-hanger job that's about 33 pounds of clamps, which matters if you're staging material up a ladder or a lift.