Eaton B-Line series strut pipe clamps and accessories, .12" height, 8.662" length, 1.25" width, 1000 lbs, Steel, Include combination recess hex head machine screw, Electro-plated zinc, 3/8 - 16
Manufacturer Resources
Product Specs
- Bolt Pin Size:
- 3/8"-16
- Certifications:
- Not Applicable
- Load Capacity:
- 1000 lbs
- Product Height:
- .12 in
- Product Length Depth:
- 8.662 in
- Product Weight:
- .84 lb
- Product Width:
- 1.25 in
- Special Features:
- Include combination recess hex head machine screw
- Department:
- Electrical
- Product Material:
- Steel
- Product Length:
- 8.662 in
B-LINE B2067ZN – Frequently Asked Questions
1) What size bolt does the B-Line B2067ZN strut clamp take?
The B2067ZN uses a 3/8"-16 thread, and the combination recess hex head machine screw is included with the clamp. If your strut channel nuts are 1/2"-13, they won't mate with this hardware, so keep the fastener size consistent across the run.
2) Do I need to buy the screw separately for this B-Line strut pipe clamp?
No. A combination recess hex head machine screw ships with the clamp, so the fastener that closes it is covered. What you still need on the job is the strut channel itself and a 3/8"-16 channel nut or spring nut to receive the screw in the strut.
3) What are the dimensions and weight of the B-Line B2067ZN clamp?
The B2067ZN measures .12 x 8.662 x 1.25 inches (height, length/depth, width as published) and weighs .84 lb. The 8.662 inch length is what to check against your strut width and the pipe diameter you're wrapping, since a clamp strap of that length only closes around a limited pipe range.
4) Is the zinc plating on the B2067ZN strut clamp suitable for outdoor or wet locations?
It is electro-plated zinc over steel, which is a dry indoor-interior finish. For exterior runs, roof-top racks, wash-down areas, or corrosive process spaces, step up to hot-dip galvanized or stainless clamp hardware instead. Electro-zinc will surface-rust once it's wet repeatedly.
5) Can I use the same strut clamp for both electrical conduit and plumbing pipe?
Strut pipe clamps of this type are sized by the outside diameter they wrap, not by what's inside, so the same clamp body works for conduit or pipe as long as the OD matches. Match the clamp to the pipe OD rather than to the trade size, because rigid conduit, EMT, and steel pipe of the same nominal size don't share an outside diameter.
6) Does the B-Line B2067ZN clamp carry a UL listing or other certification?
No certification is applied to the B2067ZN. If your spec or inspector requires a listed support assembly for the run, that requirement has to be satisfied by the specified component, not by this clamp.
How fast can I get the B-LINE B2067ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B2067ZN come with a warranty?
Absolutely. The B-LINE B2067ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B2067ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B2067ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.