B-Line Eaton series Type 1 junction boxes, 10" height, 8" length, 10" width, 1, Screw cover, SCGV NK enclosure, Surface mounted, Small single door, N

No. The 10108 SCGV NK carries a NEMA Type 1 rating, which is indoor use only and protects against incidental contact and falling dirt, not water, rain, or hosedown. For a wet exterior wall or a washdown area you need a Type 3R, 4, or 4X enclosure instead. Indoor electrical rooms, ceiling spaces, and dry corridors are where this one belongs.

No knockouts. The 10108 SCGV NK is supplied blank, so every conduit entry gets punched or drilled in the field wherever your raceway lands. That is an advantage on a retrofit where existing conduit does not line up with a factory pattern, but budget time for a knockout punch set. The 16 gauge galvanized steel wall punches cleanly with a hydraulic or ratchet punch.

It is built to UL 50, the standard for enclosures for electrical equipment, and rated NEMA Type 1. That is the pairing most indoor commercial junction box specs call out. Eaton B-Line manufactures it in the United States, which also covers Buy American style procurement language on public work.

It measures 10 inches high, 10 inches wide, and 8 inches deep, so it is a fairly deep square pull box rather than a shallow gutter box. The 8 inch depth gives room to make up several large conductors or sit a small relay or terminal strip inside without crowding the cover.

It is a surface mount box with thru holes in the back pan, so it fastens straight to studs, block, or Unistrut with your own fasteners, which are not supplied. At 9.1 pounds empty one person can hold and set it. The cover also has keyhole slots, so you can start the cover screws, hang the cover on them, and tighten rather than juggling the plate.

Screw cover. The 10108 SCGV NK uses a removable plated-screw cover, not a hinged door. For a pull point or splice box you open once in years that is fine and it is more secure against casual opening. If the enclosure will be opened routinely for testing or resetting, a hinged-cover enclosure saves you handling loose screws on a ladder.

The Eaton B-Line part number is 10108 SCGV NK. Reading it: 10108 is the 10 inch by 10 inch by 8 inch size, SCGV is screw cover galvanized, and NK means no knockouts. Ordering the same size with a knockout pattern is a different suffix, so if your conduit entries are standard you may want the knockout version instead.

Yes for a 10 x 10 x 8 inch box. The 16 gauge galvanized steel wall keeps the pan rigid at that footprint, so it will not oilcan when you pull conductors through or torque a lug inside. It is also thin enough to punch conduit entries in the field with standard tooling.