B-Line Eaton series Type 1 junction boxes, 24" height, 2" length, 12" width, 1, Screw cover, SC enclosure, Surface mounted, Medium single door, 9 sid

No. The 241212 SC carries a NEMA Type 1 rating, which is indoor use only, for protection against incidental contact and falling dirt. It gives you no protection against rain, hose-down, dust ingress or corrosive atmospheres. For a wet or outdoor location you need a NEMA 3R or 4 enclosure instead. Indoors, in a mechanical room, electrical closet or above a ceiling, it is the right class of box.

It measures 24 inches high, 12 inches wide and 2 inches deep. That 2 inch depth is the detail to watch: it is a shallow pull and splice box, so it suits routing and terminating conductors flat against a wall, not housing deep devices, breakers or bulky wire nuts on large conductors. Check your conduit fill and bending space against the 2 inch depth before you commit.

It is a surface mounted enclosure with thru holes in the back pan, so you fasten it directly to the wall, backboard or strut through those holes. Anchors and screws are chosen for your substrate and are not part of the enclosure. At 24.1 pounds empty, fasten into studs, strut or masonry anchors rather than drywall alone, and remember the cover has keyhole slots so you can hang it on partly driven screws while you set the rest.

Nine knockouts on the sides, five on the top and five on the bottom. That layout lets you bring conduit in from either end and branch off the long sides without drilling, which is why it works well as a wireway-style pull box on a wall run. If your entries do not line up with the factory knockouts, the carbon steel body can be drilled or punched on site.

A screw cover box like the 241212 SC is for openings you rarely need to get into: splices, pull points, taps. The cover comes off entirely, so you need clear working space in front and a hand free to hold it. Keyhole slots on the cover make that one-man job easier. If someone will be opening the box routinely to reset, test or land new circuits, a hinged door enclosure is the better call.

The model is 241212 SC from the Eaton B-Line series, an SC screw cover Type 1 enclosure in the medium single door style. The number reads straight off the size: 24 high, 12 wide, 12 referring to the series designation, with SC for screw cover. It is made in the US.

ANSI 61 grey is the standard light grey used across most commercial electrical gear, so the 241212 SC will read as a match next to typical painted panelboards, wireway and control enclosures. Exact shade can drift between manufacturers and with age, but for a facility standardizing on grey steel enclosures it is the expected color.