B-Line Eaton series Type 1 junction boxes, 24" height, 8" length, 20" width, 1, Screw cover, SC NK enclosure, Surface mounted, Medium single door, No

No. The 24208 SC NK is a NEMA Type 1 enclosure, which is indoor use only and offers no protection against rain, hose-down, or dust ingress. For a wet or outdoor location you need a Type 3R or Type 4 enclosure instead. It is UL 50 listed.

24 inches high, 20 inches wide, and 8 inches deep. That 8 inch depth is what gives you room for wire bending and splices behind a screw cover. It weighs 36.3 lb, so plan on two hands or a helper when hanging it.

It ships with no knockouts. Every conduit entry has to be punched or hole-sawed on site, which lets you place entries exactly where your runs land. Bring a knockout punch set sized for your conduit trade sizes; the body is 14 gauge carbon steel.

It is a screw cover, so it lifts off completely once the plated screws are backed out. The cover has keyhole slots, so you can loosen the screws part way and slide the cover off rather than fully removing every fastener, which helps when you are working overhead. If you want a door you can swing open and leave attached, choose a hinged cover enclosure instead.

Surface mount, using thru holes in the back of the box. You supply the fasteners and anchors appropriate to your wall, whether that is masonry, unistrut, or stud framing. At 36.3 lb empty, back it into structure rather than drywall alone.

Painted ANSI 61 grey, the standard gray used on most industrial electrical gear, so it matches typical panelboards and control enclosures on the same wall.

Yes, country of origin is the United States. That matters on public and institutional jobs that carry domestic sourcing requirements.