B-Line Eaton series Type 3/3R ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2,281.84
B-Line Eaton series Type 3/3R junction boxes, 24" height, 6" length, 18" width, 3 and 12, Screw cover, WPSC enclosure, Surface mounted, Medium single

B-Line Eaton series Type 3/3R junction boxes, 24" height, 6" length, 18" width, 3 and 12, Screw cover, WPSC enclosure, Surface mounted, Medium single

(No reviews yet) Write a Review

Model: 24186 WPSC
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2,281.84
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series Type 3/3R junction boxes, 24" height, 6" length, 18" width, NEMA 3 and 12, Screw cover, WPSC enclosure, Surface mounted, Medium single door, External mounting feet, Carbon steel, Oil-resistant gasket, gasketed screws

Manufacturer Resources

Product Specs

Certifications:
UL 50
Closure Type:
Flanged cover
Country Of Origin:
United States
Cover Type:
Screw
Finish Color:
Painted
Mounting Hole Details:
External mounting feet
Mounting Method:
Surface
Nema Rating:
3
Product Height:
24 in
Product Length Depth:
6 in
Product Weight:
24.1 lb
Product Width:
18 in
Wall Thickness:
16 gauge
Department:
Electrical
Product Model:
WPSC enclosure
Product Color:
ANSI 61 Grey
Product Style:
Medium single door
Product Material:
Carbon steel

B-LINE 24186 WPSC – Frequently Asked Questions

1) Can the B-Line 24186 WPSC junction box be mounted outdoors?
Yes. The 24186 WPSC is a Type 3/3R enclosure, so it is built for outdoor use against rain, sleet and windblown dust. It uses an oil-resistant gasket and gasketed screws on a flanged screw cover to keep water out, and it is UL 50 listed. The carbon steel body is painted ANSI 61 grey.
2) What are the actual box dimensions on the B-Line 24186 WPSC enclosure?
24 inches high, 18 inches wide and 6 inches deep. That 6 inch depth is what decides most jobs: it gives you room for terminal blocks, wire gutter space or a small DIN rail assembly, but it is shallow for deep-bodied components. The box weighs 24.1 lb empty.
3) Is this junction box also rated NEMA 12 for indoor dusty plant areas?
The 24186 WPSC is described as NEMA 3 and 12, so it suits indoor industrial spaces with circulating dust, falling dirt and dripping non-corrosive liquids as well as outdoor Type 3R service. The oil-resistant gasket is the reason it holds a 12 rating in a machine shop or wash-down-adjacent area.
4) Does this box come with mounting brackets, or do I have to buy feet separately?
External mounting feet are part of the enclosure, so it goes straight onto a wall, strut or backplane without ordering a separate bracket kit. Mounting is surface type, and because the feet are external the cover gasket seal is never broken by mounting fasteners. You supply the anchors for your wall material.
5) Screw cover vs hinged door enclosure, which should I use for a junction box?
A screw cover like the 24186 WPSC is the right pick for a pull box or splice point you open rarely, since the flanged cover comes off completely and every screw is gasketed for a better seal. If the enclosure houses controls, breakers or anything needing regular access or a panel-mounted device, choose a hinged door version instead so the cover stays captive when open.
6) Does the B-Line 24186 WPSC come with conduit holes punched?
No. It is supplied as a blank screw cover enclosure, so you drill or punch your own conduit entries where the run lands. Body and cover are 16 gauge carbon steel, which punches cleanly with a standard knockout punch, and any entry you make needs a Type 3R rated hub or fitting to keep the outdoor rating.
7) Is a painted carbon steel enclosure OK for a coastal or chemical site?
Carbon steel with an ANSI 61 grey painted finish holds up in most outdoor and industrial settings, but it is not the choice for salt spray, wash-down chemicals or corrosive process areas. For those, go to a Type 4X stainless or non-metallic enclosure. Painted steel is standard for wall-mounted pull and splice boxes on general commercial work.
8) Will this hold up as a standardized pull box across a facility?
It is a reasonable standard for outdoor and dusty-area pull points: single door, medium single door style, 16 gauge steel, UL 50 listed, one part number (24186 WPSC) in a single 24 x 18 x 6 size. Buying the same box repeatedly means one gasket and one cover screw pattern across the site. Larger or deeper runs need a different size in the same WPSC family.
How fast can I get the B-LINE 24186 WPSC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 24186 WPSC come with a warranty?
Absolutely. The B-LINE 24186 WPSC is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 24186 WPSC?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 24186 WPSC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!