B-Line Eaton series Type 3/3R junction boxes, 6" height, 4" length, 4" width, 3 and 12, Screw cover, WPSC enclosure, Surface mounted, Small single do

It measures 6 inches high, 4 inches wide and 4 inches deep, a small single-door box for a splice point, a couple of contactors or a terminal block run. Weight is 3.5 lb, so one person can hold it while setting the anchors.

No, and that is the point of it. The 664 WPSC has external mounting feet, so you anchor it to the surface without drilling the back pan or breaking the gasket seal. Surface mount only, and the feet hold the box off the wall so water does not sit behind it.

A screw cover box like the 664 WPSC is right where you open it rarely: splices, pull points, a fixed terminal block. The flanged cover with gasketed screws gives a consistent seal every time you close it, but you have to handle loose screws and the cover up a ladder. If the box is something you will open weekly for adjustment or troubleshooting, choose a hinged-door enclosure instead so the cover stays captive.

The body is 16 gauge carbon steel, finished in ANSI 61 grey paint. That is the usual commercial and industrial wall thickness for a box this size and it stands up to normal plant and jobsite handling. In a spot with real forklift or cart traffic, mount it above impact height or add a guard.

The catalog number is 664 WPSC from Eaton B-Line. The digits describe the box: 6 inch height, 4 inch width, 4 inch depth, with WPSC identifying the weatherproof screw cover style.

The finish is ANSI 61 grey, the standard industrial control enclosure color, so it will read the same as most existing B-Line, control panel and disconnect enclosures on a plant floor or skid. It is a painted finish over carbon steel and can be repainted if your facility uses a different color code.

Yes, country of origin is the United States. That matters if you are buying against a domestic-preference spec on a government or institutional project.