B-Line Eaton series utility cabinets, 1, ANSI 61 gray painted, Houses electrical controls and instruments, Steel, Type 1 telephone termination cabine

The 128 TCF measures 8 in height, 8 in length/depth and 5 in width, and weighs 3.7 lb. That box size suits a small telephone or low-voltage termination point rather than a full backboard install, so check your cable bend radius and the number of terminations before committing.

No. The 128 TCF is built as a flush mount cabinet, meaning it is recessed into the wall cavity with the trim sitting against the finished surface. If you need a box hung on the face of a block or concrete wall, you want a surface mount version of the utility cabinet instead.

No. NEMA 1 is an indoor enclosure rating: it guards personnel against contact with the enclosed equipment and keeps out falling dirt, with no protection against rain, hose-down, or dust ingress. Use the 128 TCF in dry indoor spaces like a telecom closet, corridor, or mechanical room. For exterior walls or wet areas you need a NEMA 3R or 4/4X enclosure.

It houses electrical controls and instruments, and is specifically a Type 1 telephone termination cabinet, the recessed box where incoming telephone or low-voltage pairs are landed and terminated. Property managers and MRO buyers typically use it at unit entry points or in corridors where the termination needs to sit inside the wall and out of the way.

Steel construction with an ANSI 61 gray painted finish, the standard gray used across most industrial control enclosures, so it will read consistent with switchgear and control panels already on site. The description lists 14 gauge steel for the build.

The 128 TCF is certified to CSA C22.2, which is what a Canadian specifier or inspector will be looking for on an enclosure of this type.

Order it as Eaton B-Line model 128 TCF. There is one configuration, the flush mount ANSI 61 gray steel version, so there is no finish or mounting option to specify on the order.