B-Line Eaton series utility cabinets, 1, ANSI 61 gray painted, Protects against contact with enclosed equipment, Steel, Utility cabinets, Type 1 tele

No. The 1815 TCS carries a NEMA 1 rating, which is an indoor enclosure type that guards against contact with the equipment inside and against falling dirt. It offers no protection against rain, hose-down, or washdown, so keep it in dry interior spaces like a telecom closet, mechanical room, or interior corridor. For an exterior wall or a damp area you need a NEMA 3R or 4 enclosure instead.

Surface mount. The 1815 TCS hangs on the face of a wall or backboard, so you do not need to cut into framing or set it between studs. If your spec calls for a recessed, flush-trim telephone cabinet, this is not the box for that opening.

Yes, that is exactly what it is for. It is a Type 1 telephone termination cabinet, an indoor steel box for landing incoming telephone or low-voltage pairs on a backboard and keeping fingers away from the terminations. For multi-family and commercial work it is the usual box at the demarc or on a floor riser.

The cabinet measures 14 in height, 14 in depth, and 11 in width, and it weighs 7.1 lb. Those are the numbers to use when you are laying out backboard space or checking clearance to an adjacent panel.

It is 16 gauge steel finished in ANSI 61 gray paint, the standard gray used across most electrical gear, so it will match adjacent panels and pull boxes in a typical commercial telecom room without repainting.

The cabinet is built to CSA C22.2, the Canadian standard series for electrical enclosures, which is what a Canadian inspector or an institutional spec writer will be looking for on the submittal.