You may also like
Eaton B-Line series wireway connector, Connector style, Wireway connector, NEMA 1, Galvanized steel finish, 8" X 8"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Product Height:
- 8 in
- Product Length Depth:
- 8 in
- Product Weight:
- 1.374 lb
- Product Width:
- 7.9 in
- Wiring Method:
- Connector style
- Department:
- Electrical
- Product Type:
- Wireway connector
- Product Details:
- Wireway connector
- Product Material:
- Galvanized steel
B-LINE 88 HSC – Frequently Asked Questions
1) Will the B-Line 88 HSC wireway connector fit 8 x 8 inch wireway?
Yes. The Eaton B-Line 88 HSC is sized for 8 inch by 8 inch wireway, with a stated 8 in height and 8 in length/depth and a 7.9 in width. If your trough run is a different cross section, such as 4 x 4 or 6 x 6, you need the connector built for that size instead.
2) Is the 88 HSC wireway connector rated for outdoor or wet locations?
No. The 88 HSC carries a NEMA 1 degree of protection, which is indoor, general purpose only, intended to guard against incidental contact with the enclosed wiring. For outdoor, washdown, or damp environments you need a NEMA 3R or 4 rated raintight trough and matching fittings.
3) Is this B-Line wireway connector UL Listed for an inspected commercial job?
The 88 HSC wireway connector is UL Listed. Pair it with UL Listed wireway of the same NEMA 1 classification so the assembly stays within listing when the inspector walks the run.
4) What does a wireway connector actually do in a trough run?
It joins two sections of wireway end to end so the run is electrically and mechanically continuous. The 88 HSC uses a connector style wiring method, so the sections butt together through the fitting rather than being coupled by a separate lay-in body. It is a joining piece, not an elbow or a tee, so corners and branches still need their own fittings.
5) Is the 88 HSC connector painted or galvanized, and will it hold up in a plant or parking garage?
Galvanized steel, unpainted. That suits dry indoor industrial and MRO use where a painted finish would chip during install. Because the NEMA 1 rating is indoor general purpose, it should not be treated as a corrosion or weather solution in an open garage or exterior run.
6) How heavy is a single 8 x 8 wireway connector for take-off and shipping counts?
Each 88 HSC weighs 1.374 lb, so a box of fittings for a long trough run stays easy to carry up a lift. Handy when you are pricing out a multi-section run and need connector counts alongside the wireway lengths.
How fast can I get the B-LINE 88 HSC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 88 HSC come with a warranty?
Absolutely. The B-LINE 88 HSC is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 88 HSC?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 88 HSC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.