You may also like
Eaton B-Line series wireway cross fitting, Lay-in, 90 degree elbow-tee-cross, NEMA 1, Steel, ANSI 61 gray painted, 8" X 8"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 8 in
- Product Length Depth:
- 10 in
- Product Weight:
- 7.351 lb
- Product Width:
- 8 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Wireway cross fitting
- Product Details:
- Wireway cross fitting
- Product Material:
- Steel
B-LINE 88 LTX – Frequently Asked Questions
1) Will the B-Line 88 LTX fitting mate with 8 x 8 wireway trough?
Yes. The 88 LTX is sized for 8 inch by 8 inch lay-in wireway, with a stated 8 inch height and 8 inch width and a 10 inch length/depth. It joins runs of the same 8x8 cross section, so if your trough is a different size (6x6 or 4x4, for example), you need the fitting built for that size instead.
2) Can one B-Line 88 LTX fitting be used as an elbow, a tee, or a cross?
It is a single 90 degree elbow-tee-cross body, so the same part covers all three directions of pull. You close off the openings you are not using and land conductors through the ones you are, which means a contractor can stock one fitting instead of three separate turn, branch, and four-way bodies.
3) Is the 88 LTX wireway fitting rated for outdoor or wet locations?
No. It is a NEMA/Type 1 enclosure rating, which is indoor, general purpose, dust and falling dirt only. For rooftops, exterior walls, wash-down areas, or anywhere water can hit it, you need a Type 3R or Type 4 raintight wireway fitting instead.
4) What does "lay-in" mean on this B-Line wireway cross, and does it make pulls easier?
Lay-in means the cover comes off so conductors drop straight into the trough rather than being fished through. At a 90 degree turn or a four-way branch, that is the difference between setting wire in place by hand and pulling around a corner, which is why lay-in bodies are standard on panel feeder and control runs.
5) What is the exact part number to order this 8 x 8 B-Line elbow-tee-cross?
Order Eaton B-Line part number 88 LTX. That is the 8 x 8 NEMA 1 lay-in 90 degree elbow-tee-cross in ANSI 61 gray painted steel.
6) Will the finish on this fitting match existing B-Line wireway already installed?
It is painted ANSI 61 gray, the standard gray used across industrial wireway and enclosures, so it blends with existing ANSI 61 gray trough and gutter in the same run. If your existing run is white or a custom color, expect a visible difference.
7) How heavy is the 8 x 8 wireway cross fitting for overhead mounting?
It weighs 7.351 lb and the body is steel, so a single installer can set it, but support it on its own hangers or strut at the turn rather than letting adjoining trough sections carry it.
How fast can I get the B-LINE 88 LTX delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 88 LTX come with a warranty?
Absolutely. The B-LINE 88 LTX is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 88 LTX?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 88 LTX from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.