You may also like
Eaton B-Line series wireway cross fitting, Lay-in, Wireway cross fitting, NEMA 1, Steel, ANSI 61 gray painted, 6" X 6"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 6 in
- Product Length Depth:
- 14.24 in
- Product Weight:
- 7.691 lb
- Product Width:
- 6 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Wireway cross fitting
- Product Details:
- Wireway cross fitting
- Product Material:
- Steel
B-LINE 66 X – Frequently Asked Questions
1) Will the B-Line 66 X cross fitting mate with 6 x 6 wireway trough?
Yes. The Eaton B-Line 66 X is sized 6 inches by 6 inches, so it connects four runs of 6 x 6 wireway at a four-way intersection. Overall length/depth of the fitting body is 14.24 inches, which is the dimension to allow for in the layout when you are figuring cut lengths on the adjoining troughs.
2) Is the 66 X wireway cross fitting rated for outdoor or wet locations?
No. It is a NEMA 1 enclosure rating, which is indoor, general purpose only, with no protection against falling water, rain, or washdown. For an outdoor run or a damp area you need a NEMA 3R or NEMA 4 rated wireway cross instead.
3) Does the 66 X cross let you lay conductors in, or do you have to pull them through?
It is a lay-in fitting. The cover comes off so you can drop conductors straight down into the cross at the intersection rather than fishing them through, which is the reason to use a fitting like this instead of turning the corner with conduit.
4) When should I use a wireway cross instead of a tee?
Use the cross when four wireway runs meet at one point, north, south, east and west off the same junction, as in a panel gallery or a machine room feeding several directions. A tee handles three legs only. The 66 X is the 6 x 6 lay-in cross for that four-way condition.
5) What finish does the B-Line 66 X wireway cross come in, and will it match existing gray wireway?
Painted ANSI 61 gray over steel, which is the standard gray used across Eaton B-Line wireway and most commercial electrical enclosures. If the existing run is ANSI 61 gray, the cross will match it.
6) How heavy is the 6 x 6 wireway cross fitting for overhead support planning?
About 7.691 pounds for the steel 66 X cross itself, before conductors. Light enough for one person to set, but at a four-way intersection you are carrying the weight of four converging troughs, so hangers should land close to the fitting on each leg.
7) What is the part number for the Eaton B-Line 6 inch by 6 inch lay-in wireway cross?
The manufacturer part number is 66 X, an Eaton B-Line series steel cross fitting in ANSI 61 gray, sized 6 x 6.
How fast can I get the B-LINE 66 X delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 66 X come with a warranty?
Absolutely. The B-LINE 66 X is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 66 X?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 66 X from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.