You may also like
Eaton B-Line series wireway elbow fitting, Includes (1) gasket and hardware, Feed through, 90° elbow, NEMA 12, Steel, 6" X 6"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Product Height:
- 13 in
- Product Length Depth:
- 7 in
- Product Weight:
- 8.539 lb
- Product Width:
- 6 in
- Special Features:
- Includes (1) gasket & hardware, NEMA12
- Wiring Method:
- Feed through
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° elbow
- Product Details:
- 90° elbow
- Product Material:
- Steel
B-LINE 66-12FE9 – Frequently Asked Questions
1) Will the B-Line 66-12FE9 elbow fit 6x6 wireway?
Yes. The 66-12FE9 is sized for 6 inch by 6 inch wireway trough, which is where the 66 prefix comes from, and it turns the run 90 degrees. Its own width is listed at 6 inches, with a 13 inch height and 7 inch depth, so allow that much clearance at the corner before you set your hangers.
2) Is this B-Line wireway elbow rated for washdown or oily/dusty areas?
It is a NEMA 12 fitting, so it is built for indoor protection against falling dirt, circulating dust, and dripping non-corrosive liquids, and a gasket is supplied to keep that rating at the joint. NEMA 12 is not a hosedown or outdoor rating, so for washdown or wet exterior runs you want NEMA 4 or 4X wireway instead.
3) Is the B-Line 66-12FE9 elbow UL Listed for inspection sign-off?
Yes, it is UL Listed, which is what an inspector on an institutional or commercial job looks for on a metal wireway fitting. It carries Eaton B-Line part number 66-12FE9.
4) Does the 66-12FE9 elbow come with the gasket and bolts, or do I order those separately?
One gasket plus the connecting hardware ships with the elbow, so an electrician has what is needed to land it on the trough ends without a separate hardware kit. You still supply the wireway sections themselves and any hangers or supports.
5) What does "feed through" mean on this wireway elbow?
Feed through means conductors pass straight through the fitting around the corner, with no taps, splices, or pull-point terminations designed into it. It is a directional change in the raceway only. If you need to pull and splice at that corner, specify a pull box or a fitting rated for splicing rather than a feed through elbow.
6) I need to turn a 6x6 wireway run 90 degrees on the flat versus turning it up or down. Does one elbow cover both?
The 66-12FE9 is a single 90 degree elbow configuration in the 6x6 NEMA 12 steel line. Eaton B-Line builds the family with separate fittings for the different turn orientations, so match the part to the plane of your turn rather than assuming one elbow works both ways, and confirm the orientation you need against the model designation before you order.
7) Is this elbow steel or aluminum, and how much does one weigh for overhead support?
Steel construction, and one unit weighs 8.539 lb. At that weight a single elbow adds little to a hanger calculation, but on a long overhead 6x6 run the steel trough plus fittings is heavy enough that you size trapeze supports for the loaded raceway, not the fitting alone.
How fast can I get the B-LINE 66-12FE9 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 66-12FE9 come with a warranty?
Absolutely. The B-LINE 66-12FE9 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 66-12FE9?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 66-12FE9 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.