You may also like
Eaton B-Line series wireway elbow fitting, Lay-in, 15° elbow, top opening, NEMA 12, Steel, 4" X 4"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Product Height:
- 4 in
- Product Length Depth:
- 4 in
- Product Weight:
- 3.3 lb
- Product Width:
- 4 in
- Special Features:
- NEMA12
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 15° elbow, top opening
- Product Details:
- 15° elbow, top opening
- Product Material:
- Steel
B-LINE 44-12LE15A – Frequently Asked Questions
1) What size wireway does the B-Line 44-12LE15A elbow fit?
The B-Line Eaton 44-12LE15A elbow is built for 4 x 4 inch wireway, with 4 inch height, 4 inch width and 4 inch length/depth. It will not mate up to 6 x 6 or 8 x 8 trough, so match the run size before ordering.
2) Is this wireway elbow rated for a washdown or dusty industrial area?
It is a NEMA 12 fitting, which covers indoor use against falling dirt, dust and dripping non-corrosive liquids. That suits a plant floor or shop, but NEMA 12 is not a wet-location or outdoor rating, so for exterior runs you need NEMA 3R raintight wireway and fittings instead.
3) What does a 15 degree top opening elbow do in a wireway run?
It puts a 15 degree change of direction into a 4 x 4 steel wireway run, with the removable cover on the top face so you can lay conductors in from above rather than pulling them through. Useful where the trough has to follow a sloped ceiling, a beam line or a slight offset in the wall rather than turning a full 90.
4) Can conductors be laid into this elbow instead of pulled?
Yes. It is a lay-in fitting, so the cover comes off and wire drops straight into the channel. That is the reason to spec wireway over conduit on a run with many conductors and multiple direction changes, since you skip the pull entirely.
5) What part number do I order for this B-Line 15 degree wireway elbow?
Order Eaton B-Line model 44-12LE15A. The 44 prefix carries the 4 x 4 inch size and the 12 is the NEMA 12 rating, so distributors cross it as the 4 x 4 NEMA 12 lay-in 15 degree top-opening elbow.
6) Is this elbow steel or aluminum, and how heavy is it?
Steel construction, 3.3 lb for the 4 x 4 size. Light enough for one person to set on a trapeze or strut hanger while the run is being assembled.
How fast can I get the B-LINE 44-12LE15A delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 44-12LE15A come with a warranty?
Absolutely. The B-LINE 44-12LE15A is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 44-12LE15A?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 44-12LE15A from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.