You may also like
Eaton B-Line series wireway elbow fitting, Lay-in, 90° elbow, side opening, NEMA 1 rated, Steel, ANSI 61 gray painted, 4" X 4"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 4 in
- Product Length Depth:
- 4 in
- Product Weight:
- 3.598 lb
- Product Width:
- 8.753 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° elbow, side opening
- Product Details:
- 90° elbow, side opening
- Product Material:
- Steel
- Product Length:
- 4 in
B-LINE 44 HSLSIDE – Frequently Asked Questions
1) Will the B-Line 44 HSLSIDE elbow fit my 4 x 4 wireway run?
Yes, it's sized for 4 inch by 4 inch lay-in wireway. The fitting is listed at 4 in height and 4 in length/depth, matching a 4x4 trough cross section, so it couples straight into a standard 4x4 gutter run. It will not work on 6x6 or 8x8 wireway, which needs the matching size fitting.
2) Is this B-Line elbow rated for outdoor or wet locations?
No. It's a NEMA 1 rated fitting, which is indoor, dry location only, providing a degree of protection against incidental contact with the enclosed equipment and falling dirt. For outdoor, rain, or washdown areas you need NEMA 3R or NEMA 4 rated wireway and fittings.
3) What is a side opening 90 degree wireway elbow used for, and when would I use a flat elbow instead?
A side opening 90 elbow turns a wireway run 90 degrees in the horizontal plane, with the removable cover on the side of the fitting so you can lay conductors in from the side. Use it where the run changes direction left or right along a wall. If your run has to turn up or down (changing elevation), you want the flat or top opening version instead, since the access cover has to face where the installer can reach it.
4) Can I pull wire through this elbow, or do I have to lay it in?
It's built as a lay-in fitting. You remove the side cover and drop the conductors into the elbow rather than pulling them around the 90, which is the reason lay-in wireway is used at direction changes instead of conduit elbows.
5) What finish and material is the 44 HSLSIDE elbow, and will it match my existing gutter?
Steel with an ANSI 61 gray painted finish. That's the same standard gray used across the Eaton B-Line lay-in wireway line and on most industrial control gear, so it'll blend with an existing ANSI 61 gray run without a paint touch-up.
How fast can I get the B-LINE 44 HSLSIDE delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 44 HSLSIDE come with a warranty?
Absolutely. The B-LINE 44 HSLSIDE is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 44 HSLSIDE?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 44 HSLSIDE from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.