You may also like
Eaton B-Line series wireway end, Wireway end, NEMA 1, Galvanized steel, 10" X 10"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Product Height:
- 10 in
- Product Length Depth:
- 10.06 in
- Product Weight:
- 2.198 lb
- Product Width:
- 10 in
- Department:
- Electrical
- Product Type:
- Wireway end
- Product Details:
- Wireway end
- Product Material:
- Galvanized steel
B-LINE 1010 EGV NK – Frequently Asked Questions
1) Will the Eaton B-Line 1010 EGV NK end fit a 10x10 wireway run?
Yes. The 1010 EGV NK is sized for 10 by 10 inch wireway, with a 10 inch height and 10 inch width, and 10.06 inches of length/depth on the body. It closes off the open end of a straight section or fitting in a 10 by 10 system. It will not work on 4x4, 6x6, or 8x8 wireway.
2) Is this wireway end rated for outdoor or wet locations?
No. The B-Line 1010 EGV NK end is NEMA 1, which is indoor, general purpose only. It gives protection against incidental contact and falling dirt, not rain, washdown, or corrosive atmospheres. For exterior runs or damp mechanical rooms you need a NEMA 3R raintight wireway and matching 3R end plate instead.
3) Is the B-Line 1010 EGV NK UL Listed for an inspected commercial job?
It is UL Listed. That matters on a wireway run because the closure plate is part of the listed enclosure system, and an inspector will look for a listed end rather than a field-fabricated cover on the open end of the trough.
4) What is the 1010 EGV NK made of, and will it hold up in a warehouse or plant?
Galvanized steel. The zinc coating handles the damp and dust of a warehouse, shop, or plant interior better than painted steel where the finish gets scratched during install. It is still a NEMA 1 part, so keep it out of direct weather and washdown areas.
5) Do I need an end plate on every wireway run, or just the last section?
You need one on each open end of the run. The 1010 EGV NK closes a single 10 by 10 opening, so a straight run terminating at both ends takes two, and a tee or cross with an unused outlet takes one per unused opening. Count the open faces on your layout, not the number of sections.
6) What part number should I order for a 10x10 galvanized NEMA 1 wireway end?
Eaton B-Line part number 1010 EGV NK. That is the 10 by 10 inch, NEMA 1, galvanized steel wireway end in the B-Line series. Quote it by that number so the galvanized version does not get substituted with a painted one.
How fast can I get the B-LINE 1010 EGV NK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 1010 EGV NK come with a warranty?
Absolutely. The B-LINE 1010 EGV NK is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 1010 EGV NK?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 1010 EGV NK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.