You may also like
Eaton B-Line series wireway miscellaneous fitting, Feed through, Wireway cutoff fitting, NEMA 12 rating, Steel, 4" X 4"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Product Height:
- 4 in
- Product Length Depth:
- 12 in
- Product Weight:
- 8.304 lb
- Product Width:
- 12 in
- Special Features:
- NEMA12
- Wiring Method:
- Feed through
- Department:
- Electrical
- Product Type:
- Wireway cutoff fitting
- Product Details:
- Wireway cutoff fitting
- Product Material:
- Steel
- Product Length:
- 12 in
B-LINE 44-12FC – Frequently Asked Questions
1) Will the B-Line 44-12FC cutoff fitting work with 4 x 4 inch wireway?
Yes. The Eaton B-Line 44-12FC is built for 4 inch by 4 inch wireway runs, and it is a feed-through fitting, so wire passes straight through it rather than being turned or tapped off. Use it where you need to break or terminate a 4 x 4 run and keep conductors continuous through the joint.
2) Is this B-Line wireway cutoff fitting rated for washdown or oil-drip areas?
It carries a NEMA 12 rating, which covers indoor use against falling dirt, circulating dust, and dripping non-corrosive liquids. That suits it to plants, machine shops, and process areas. It is not a wet-location or outdoor rating, so for rain or hose-down you need NEMA 3R or 4X wireway and fittings instead.
3) What are the dimensions and weight of the B-Line 44-12FC cutoff fitting?
The fitting measures 4 in height, 12 in width, and 12 in length/depth, and weighs 8.304 lb. Worth knowing before you hang it, since a 12 inch section of steel fitting adds real load to the strut or trapeze supporting the run.
4) What is a wireway cutoff fitting actually used for?
A cutoff fitting closes off or transitions the end of a wireway run while still letting conductors feed through. The B-Line 44-12FC does that job on 4 x 4 inch wireway in a NEMA 12 indoor environment. If instead you need to change direction or pull an angle, an elbow or tee fitting is the part to order, not a cutoff.
5) Is this wireway fitting steel or aluminum, and will it hold up in a damp plant?
Steel construction. That matches standard painted steel NEMA 12 wireway, so it ties into an existing run without mixing materials. For corrosive or washdown environments, stainless or a NEMA 4X product is the right call rather than this one.
6) How do I order the exact B-Line cutoff fitting, and what part number should I spec?
Specify Eaton B-Line part number 44-12FC. It comes in one configuration only: steel, NEMA 12, feed-through, for 4 x 4 wireway, so there are no finish or size options to pick between.
How fast can I get the B-LINE 44-12FC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 44-12FC come with a warranty?
Absolutely. The B-LINE 44-12FC is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 44-12FC?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 44-12FC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.