You may also like
Eaton B-Line series wireway tee fitting, Tee, Wireway tee fitting, NEMA 3R, Aluminum
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 3R
- Product Height:
- 4 in
- Product Length Depth:
- 13.84 in
- Product Weight:
- 5.113 lb
- Product Width:
- 9.04 in
- Wiring Method:
- Tee
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Wireway tee fitting
- Product Details:
- Wireway tee fitting
- Product Material:
- Aluminum
B-LINE 44-3RAHST – Frequently Asked Questions
1) Is the B-Line 44-3RAHST wireway tee rated for outdoor use?
The Eaton B-Line 44-3RAHST tee fitting carries a NEMA 3R degree of protection, so it is intended for outdoor runs where rain and falling water are the concern. It is not a washdown or dust-tight rating, so keep it out of hose-down or submerged locations. It is also UL Listed.
2) What size wireway does this B-Line tee fitting suit?
It is a 4 x 4 style fitting, matching a 4 inch square wireway trough. The fitting body measures 4 in height, 9.04 in width and 13.84 in length/depth, so allow that footprint at the junction point when laying out a run against a wall or across structure.
3) Will an aluminum wireway tee hold up in a coastal or damp outdoor location?
The body is aluminum, which does not rust the way painted steel does when the finish gets scratched during install, and the 3R rating covers outdoor rain exposure. Aluminum also keeps the piece light at 5.113 lb, which matters when you are holding a junction in place overhead on a ladder.
4) Can I mix this B-Line tee with a steel NEMA 3R wireway run?
Stick to matching material and series. The 44-3RAHST is an aluminum 3R tee and its flanges and cover arrangement are built for the matching aluminum 3R wireway trough. Pairing it to a steel trough risks a mismatched joint and dissimilar-metal contact at the seam, which undercuts the 3R rating at exactly the point water would enter.
5) Is the B-Line 44-3RAHST UL Listed for a spec job?
Yes, it is UL Listed, which is usually what an inspector or a spec writer is after on a wireway junction. Manufacturer part number is 44-3RAHST under the Eaton B-Line series if you need to write it into a submittal.
6) How much does this wireway tee weigh for overhead support planning?
5.113 lb for the fitting itself. That is light enough that the junction rarely drives the hanger design, but add the weight of the conductors passing through it and keep a support point near the tee, since three trough legs land on this one body.
How fast can I get the B-LINE 44-3RAHST delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 44-3RAHST come with a warranty?
Absolutely. The B-LINE 44-3RAHST is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 44-3RAHST?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 44-3RAHST from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.