B-Line Eaton series wiring tro...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,749.47
B-Line Eaton series wiring trough, 10" height, 48" length, 10" width, GTGV NK wiring trough, Thru holes, No knockouts, Screw cover, 1, Galvanized ste

B-Line Eaton series wiring trough, 10" height, 48" length, 10" width, GTGV NK wiring trough, Thru holes, No knockouts, Screw cover, 1, Galvanized ste

(No reviews yet) Write a Review

Model: 101048 GTGV NK
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,749.47
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series wiring trough, 10" height, 48" length, 10" width, GTGV NK wiring trough, Thru holes, No knockouts, Screw cover, NEMA 1, Galvanized steel, Plated screws, Gray, 14 gauge

Manufacturer Resources

Product Specs

Certifications:
CSA C22.2.
Closure Type:
Plated screws
Finish Color:
Gray
Material Thickness:
14 gauge
Mounting Method:
Thru holes
Product Height:
10 in
Product Length Depth:
48 in
Product Weight:
39.466 lb
Product Width:
10 in
Special Features:
Cover is held secure by plated screws
Department:
Electrical
Product Type:
GTGV NK wiring trough
Product Details:
GTGV NK wiring trough

B-LINE 101048 GTGV NK – Frequently Asked Questions

1) Is the B-Line 101048 GTGV NK wiring trough a 10 x 10 x 48 inch body?
Yes. The Eaton B-Line 101048 GTGV NK measures 10 inches high, 10 inches wide and 48 inches long, so the usable cross section is a full 10 by 10 inches for pulling and splicing conductors. The model number itself reads out as 10 x 10 x 48.
2) Can this wiring trough be used outdoors or in a washdown area?
No. It is a NEMA 1 enclosure, which is indoor, general purpose only, with no protection against falling water, dust or corrosive atmospheres. For outdoor runs or hose-down areas you need a NEMA 3R or 4 gasketed trough instead.
3) Does the 101048 GTGV NK come with knockouts already punched?
No knockouts. The body ships blank, so every conduit entry gets field punched where your run actually lands. In 14 gauge galvanized steel you will want a hole saw or a knockout punch set rather than a step bit. If you would rather not punch anything, order a knockout version of the trough instead.
4) How does the cover come off on this B-Line trough, screws or hinge?
It is a screw cover. Plated screws hold the cover on along its length, so you remove hardware to open it. That is fine for a trough you open once at install, but if electricians will be back in it often, a hinged cover trough saves time.
5) What gauge steel and finish is this trough, and will it hold up in a mechanical room?
Body is 14 gauge galvanized steel finished gray, with plated screws on the cover. That is the standard weight for indoor commercial wireway and it is appropriate for a dry mechanical or electrical room. It is not a corrosion rated enclosure, so keep it out of wet or chemical exposure.
6) Is this B-Line wireway acceptable for a Canadian job?
The 101048 GTGV NK carries CSA C22.2 certification, so it is the Canadian standard reference an inspector or spec reviewer will be looking for on a wireway submittal.
7) Do I need this 10 x 10 trough or will a smaller 6 x 6 wireway do?
Size the trough to your conductor fill and bend radius, not to the conduit. A 10 by 10 inch cross section like this one is what you use where several large feeders enter and have to be looped or tapped inside; a 4 by 4 or 6 by 6 wireway is for control and branch circuit wiring. The 48 inch length here suits a gutter above a panel board or a short run between disconnects.
8) What is the shipping weight of the B-Line 101048 GTGV NK?
It comes in at 39.466 pounds, which is a one man carry but awkward at 48 inches long. Plan on two people for overhead mounting.
How fast can I get the B-LINE 101048 GTGV NK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 101048 GTGV NK come with a warranty?
Absolutely. The B-LINE 101048 GTGV NK is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 101048 GTGV NK?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 101048 GTGV NK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!