Bussmann CB123-10B Eaton series CB123-B automotive circuit breaker, 22 Vdc, 10A, 1.5 kAIC at 12 Vdc, Automotive, type III, heavy duty, #10-32 TPI stud.
- Amp rating: 123 A
- Interrupt rating: 1.5 kAIC at 12 Vdc
- Product type: Circuit Breaker
- Dimensions (L x W x H): 0.58 x 1.8 x 1.35 in
Genuine Bussmann part number CB123-10B.
Manufacturer Resources
Product Specs
- Amperage Rating:
- 10 A
- Compliances:
- Contact factory
- Connection:
- #10-32 TPI stud
- Interrupt Rating:
- 1.5 kAIC at 12 Vdc
- Product Height:
- 1.35 in
- Product Length Depth:
- .58 in
- Product Weight:
- .54 lb
- Product Width:
- 1.8 in
- Voltage Rating:
- 22 Vdc
- Department:
- Electrical
- Product Type:
- Circuit Breaker
- Product Group:
- Fuses
- Product Subgroup:
- Automotive Fuses
Bussmann CB123-10B – Frequently Asked Questions
1) How does the CB123-10B circuit breaker connect to the wiring, and do I need ring terminals?
It terminates on #10-32 TPI threaded studs, so the wiring lands on ring terminals sized for a #10 stud, secured with #10-32 nuts. There are no push-on blades or screw clamps. Crimp your leads with #10 ring lugs before mounting, and keep the nuts tight, since a loose stud connection on a DC circuit heats up fast.
2) Is the Bussmann CB123-10B a fuse or a resettable breaker?
It is a circuit breaker, not a one-time fuse, so it is meant to trip on overload and be restored rather than replaced. The CB123-B series is described as a type III heavy duty automotive breaker, which is the manually resettable style, so after a trip you reset it at the breaker rather than waiting for it to cycle back on its own.
3) Can I use the Bussmann CB123-10B on a 24 volt truck or bus system?
No. The breaker is rated 22 Vdc, which covers nominal 12 volt systems with charging headroom but falls short of a 24 volt nominal system, where bus voltage runs near 28 volts while charging. Its 1.5 kAIC interrupting rating is also stated at 12 Vdc. For a 24 volt fleet circuit, specify a breaker rated at least 28 Vdc.
4) I need to replace a 10 amp stud-mount breaker in a truck. What exact part do I order?
Order Bussmann part number CB123-10B, from the Eaton CB123-B automotive series. Match three things against the one coming out: 10 amp rating, #10-32 studs, and a 12 volt DC circuit. The -10B suffix is the amperage, so a different number in that position is a different trip rating, not a different finish or mounting.
How fast can I get the Bussmann CB123-10B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bussmann CB123-10B come with a warranty?
Absolutely. The Bussmann CB123-10B is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bussmann CB123-10B?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bussmann CB123-10B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.