Bussmann CCDB-3-30 Eaton series CCDB UL98 non-fusible base disconnect, 600 Vac, 125 Vdc, 30A, UL98 non-fusible disconnect, Three-pole, 60 Hz, Bolt-on line side connection.
- Amp rating: 30 A
- Speed: N/A
- Product type: Disconnect Switch
- Dimensions (L x W x H): 2.7 x 3 x 4.4 in
Genuine Bussmann part number CCDB-3-30.
Manufacturer Resources
Product Specs
- Amperage Rating:
- 30A
- Certifications:
- UL 98
- Compliances:
- RoHS Compliant
- Frequency Rating:
- 60Hz
- Number Of Poles:
- Three-pole
- Product Height:
- 4.4 in
- Product Length Depth:
- 2.7 in
- Product Weight:
- .84 lb
- Product Width:
- 3 in
- Short Circuit Rating:
- 10 kAIC
- Special Features:
- Bolt on
- Voltage Rating:
- 600 Vac, 125 Vdc
- Department:
- Electrical
- Product Type:
- Disconnect Switch
- Product Group:
- Power Distribution
- Product Subgroup:
- Safety Switches & Disconnects
- Product Length:
- 2.7 in
Bussmann CCDB-3-30 – Frequently Asked Questions
1) Does the Bussmann CCDB-3-30 disconnect hold fuses, or is it non-fusible?
The CCDB-3-30 is a non-fusible base disconnect, so it switches and isolates only, there is no fuse holder in it. If the circuit needs overcurrent protection you have to get it from a fusible disconnect or from upstream breakers or fuses elsewhere in the panel.
2) Will a CCDB-3-30 work on a 480V three-phase motor circuit?
Yes. The CCDB-3-30 is rated 600 Vac and is three-pole, so 480V three-phase is inside its rating. It is also rated 125 Vdc for DC use, and carries a 60 Hz frequency rating. Current is limited to 30A.
3) How does the CCDB-3-30 connect on the line side, and do I need wire lugs?
Line side is a bolt-on connection, which is how it mounts to the bus rather than being wired in with lugs. That bolt-on arrangement is what makes it a base disconnect, so plan the install around the bus it bolts to, not around line-side conductors.
4) Is the Bussmann CCDB-3-30 a UL listed disconnect suitable for a service or MRO spec?
It is certified to UL 98, the standard for enclosed and dead-front switches, and it is RoHS compliant. That UL 98 listing is the one typically called out on drawings for disconnect switches, which is why the amp, voltage, and 10 kAIC figures matter when matching it to a spec.
5) What is the exact part number to order for the 30A three-pole non-fusible Bussmann base disconnect?
Order Bussmann CCDB-3-30, part of the Eaton CCDB series. It is the 30A, three-pole, non-fusible version rated 600 Vac / 125 Vdc with bolt-on line side connection. The number itself reads out as CCDB, 3 poles, 30 amps.
6) Can I use the CCDB-3-30 on a single-phase 240V circuit?
You can, but you are buying three poles to switch two conductors. The CCDB-3-30 is a three-pole device rated to 600 Vac, so 240V single-phase is well within rating, and the spare pole simply goes unused. If the application is single or two-pole, a disconnect ordered in that pole count is the tidier fit.
How fast can I get the Bussmann CCDB-3-30 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bussmann CCDB-3-30 come with a warranty?
Absolutely. The Bussmann CCDB-3-30 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bussmann CCDB-3-30?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bussmann CCDB-3-30 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.