You may also like
Leviton 3-Gang Decorator Wallplate, Stainless Steel, Device Mount
Model: LEV-8440140
Leviton 3-Gang Decorator Wallplate, Stainless Steel, Device MountThe Leviton is a 3-Gang Decorator wallplate built from 302 stainless steel for a durable, corrosion-resistant finish that holds up in...
Leviton
Starting at
$2.95
Eaton Stainless Steel Single-Gang Decorator Wallplate
The Eaton Stainless Steel Single-Gang Decorator Wallplate is a durable cover plate built for GFCI and decorator-style receptacles and switches. Constructed from Stainless Steel with a Decorator cutout, this Standard-size, single-gang wallplate measures 2.75 in wide by 4.5 in high with a .032 in profile, and it is UL Listed and RoHS Compliant for dependable, code-conscious installations.
Key Features
- Standard Size: 2.75 in wide x 4.5 in high, sized for standard single-gang electrical boxes.
- Slim Profile: .032 in material thickness keeps the plate low-profile and flush against the wall.
- Durable Construction: Solid Stainless steel construction resists corrosion and everyday wear for long-term performance.
- Decorator Cutout: Decorator-style cutout accommodates GFCI receptacles and decorator switches for a clean, modern look.
- Single-Gang Configuration: Number of gangs: 1, designed for single-device wall openings.
- Finish: Stainless steel finish complements both residential and commercial décor.
Certifications & Compliance
- UL Listed
- RoHS Compliant
Technical Specifications
- Warranty: Refer to warranty document.
- Number of gangs: 1
Typical Applications
- GFCI Receptacle Cover Plates
- Decorator Switch and Receptacle Installations
- Commercial and Residential Electrical Finishing
- Renovation and New Construction Wiring Devices
- Single-Gang Wall Box Installations
Why Eaton?
Eaton wallplates are built from solid Stainless steel and backed by UL Listing and RoHS compliance, giving electrical professionals a reliable, code-compliant finishing solution. The Decorator cutout and Standard sizing make this wallplate a straightforward fit for single-gang GFCI and decorator device installations across commercial and residential projects.
Manufacturer Resources
Product Specs
- Product Width:
- 2.75 in
- Warranty:
- Refer to warranty document.
- Product Color:
- Stainless steel
- Product Length/Depth:
- .032 in
- Cutout:
- Decorator
- Wallplate Size:
- Standard
- Compliances:
- RoHS Compliant
- Product Height:
- 4.5 in
- Product Material:
- Stainless Steel
- Number Of Gangs:
- 1
- Certifications:
- UL Listed
- Department:
- Electrical
- Configuration:
- Single-Gang Decorator
- Listing:
- UL Listed
- Standards:
- RoHS Compliant
- Product Group:
- Wiring Devices
- Product Type:
- Decorator Wallplate
- Product Subgroup:
- Wallplates
- Product Length:
- 0.032 in
- Product Weight:
- 0.11 lb
Eaton 93401-BOX1 – Frequently Asked Questions
1) Will the Eaton 93401-BOX1 stainless wallplate cover a standard GFCI receptacle?
Yes. The 93401-BOX1 uses a Decorator cutout, which is the same rectangular opening a GFCI receptacle or a decorator (rocker) switch needs. One device per plate, since it is single-gang.
2) Will a stainless steel decorator plate work on a toggle switch?
No. The cutout is decorator style, a single rectangular opening, so an ordinary toggle switch will not fill it. For toggle openings look at a toggle-specific plate such as the Pass & Seymour TradeMaster TP1 in light almond or red, or the Mulberry 41020 1-gang toggle switch plate.
3) The device in the box is a toggle switch, not a decorator device - what single-gang plate should I use instead of the Eaton 93401-BOX1?
The Eaton 93401-BOX1 has a Decorator cutout, so it will not cover a standard toggle switch. For a single-gang toggle opening, the Pass & Seymour TP1LA is a TradeMaster 1-gang toggle switch wall plate in nylon, light almond, and the Pass & Seymour TP1RED is the same TradeMaster toggle plate in red. The Pass & Seymour SPJ is a junior-jumbo thermoset plate with a toggle switch opening if you need extra coverage around the box.
4) I need a two-gang plate to match the Eaton 93401-BOX1 job - what are my options?
The Eaton 93401-BOX1 is a single-gang plate with one gang, so a two-gang box needs a different plate. The Mulberry 76432 is a 764 Series cold rolled steel 2-gang combination wallplate in white, the Mulberry 76532 is the 765 Series equivalent in cold rolled steel and white, and the Pass & Seymour TP126LA is a TradeMaster two-gang combination wallplate in nylon.
5) I need a color-coded plate to flag an emergency or gas shutoff switch - can I use the Eaton 93401-BOX1?
The Eaton 93401-BOX1 is stainless steel in a stainless finish, so it does not provide a color identification. For marked or colored single-gang switch plates, the Mulberry 41020 is a 4102 Series gas burner red 1-gang toggle switch plate, and the Pass & Seymour TP1RED is a TradeMaster 1-gang nylon toggle plate in red.
6) How thick is the Eaton stainless decorator wallplate, and will it sit flush?
The stainless is .032 in thick, thin enough to lie tight to the wall over a properly set device. Stamped stainless at that gauge also means the screw heads sit nearly flush rather than standing proud.
7) Is a stainless steel wallplate a good choice for a commercial kitchen or washdown area?
Stainless holds up better than painted steel or nylon where there is moisture, cleaning chemicals, or heavy traffic, because the corrosion resistance is in the base metal rather than a coating. That is the reason spec writers call it out for kitchens, labs, and back-of-house corridors. Painted steel plates like the Mulberry 8640 Series 1-gang in white are the lower-cost option where appearance matching matters more than corrosion.
8) Is the Eaton 93401-BOX1 wallplate UL Listed and RoHS compliant?
Both. It carries a UL Listing and is RoHS compliant, which is what most institutional and government spec packages ask for on finishing devices.
9) Can I standardize a whole building on this stainless plate and still match my existing devices?
The stainless finish is neutral and pairs with any device color, so it is a common choice when a property is standardizing across floors. The limit is the opening, not the color: every device behind it has to be a decorator or GFCI style, since that is the only cutout offered here. Toggle switches on older openings would need to be swapped to rockers or given a different plate.
10) What single-gang plates from other brands compete with the Eaton 93401-BOX1?
On the single-gang side, the Bryant NP26W is an HWS Series P26W 1-gang wallplate and the Bryant P8 is a P8 Series 1-gang duplex wallplate. The Eaton 93401-BOX1 differs in that it carries a Decorator cutout for GFCI and decorator devices, while the Bryant P8 is cut for a duplex receptacle - so match the cutout to the device rather than the gang count alone.
How fast can I get the Eaton 93401-BOX1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton 93401-BOX1 come with a warranty?
Absolutely. The Eaton 93401-BOX1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton 93401-BOX1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Eaton 93401-BOX1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.