You may also like
Eaton harsh-duty sensor
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Connection:
- Micro AC connector
- Cord Length:
- 2 M
- Number Of Wires:
- Three-wire
- Product Height:
- 1.18 IN
- Product Length Depth:
- 4.36 IN
- Product Weight:
- 1 LB
- Product Width:
- 1.65 IN
- Series:
- Harsh Duty Series
- Voltage Rating:
- 20-132 Vac at 50/60 Hz, 15-30 Vdc
- Department:
- Electrical
B-LINE E58-30DP150-GDP-FSC – Frequently Asked Questions
1) Is the Eaton E58 harsh duty sensor UL Listed for use in an industrial control panel?
The E58-30DP150-GDP-FSC is UL Listed. That is the rating carried on the part, and it is the one an electrical inspector or an MRO buyer standardizing panel components will be looking for on the submittal.
2) Is this a three-wire sensor or a two-wire, and does that matter for my PLC input?
Three-wire. That means separate supply, common, and a switched output leg, so it lands on a normal sourcing or sinking PLC input with the sensor powered independently of the load. Two-wire sensors put the load in series with the sensor and behave differently on leakage current, so don't drop this in as a direct two-wire replacement without checking your input card.
3) How much room do I need to mount the E58-30DP150-GDP-FSC in a machine guard bracket?
The body measures 4.36 x 1.65 x 1.18 inches (length/depth, width, height) and weighs 1 lb. Allow clearance beyond the 4.36 inch dimension for the cord exit and the Micro AC connector shell, which adds length behind the sensor.
4) What exact part number do I order for the Eaton B-Line harsh duty photoelectric sensor with the 2 m Micro AC lead?
Order E58-30DP150-GDP-FSC. It is a single-configuration item from the Harsh Duty Series, so there are no finish, voltage, or cord-length options to specify once you have that number, the 20-132 Vac / 15-30 Vdc range and the 2 meter Micro AC cordset are built in.
5) Do I need to buy a cable separately for this sensor?
No cable purchase is needed to get signal off the sensor itself, the 2 meter three-wire cord with the Micro AC connector is part of the sensor. What you will still need on the job is the mating Micro AC receptacle cordset or junction block on the panel end, since the sensor side terminates in a connector rather than bare leads.
How fast can I get the B-LINE E58-30DP150-GDP-FSC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE E58-30DP150-GDP-FSC come with a warranty?
Absolutely. The B-LINE E58-30DP150-GDP-FSC is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE E58-30DP150-GDP-FSC?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE E58-30DP150-GDP-FSC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.