You may also like
Eaton Pow-R-Way III circuit breaker plug-in unit
Manufacturer Resources
Product Specs
- Amperage Rating:
- 150A
- Circuit Breaker Frame:
- E Frame (15-225 A)
- Grounding Options:
- 50% Internal
- Interrupt Rating:
- 100 kAIC at 240 Vac
- Neutral Options:
- 100%
- Product Subgroup:
- circuit breaker
- Department:
- Electrical
- Product Group:
- Electrical Components
- Product Type:
- Breaker
- Product Length:
- 12.36 IN
- Product Details:
- Breaker
- Product Height:
- 21.2 IN
- Product Weight:
- 25 LB
- Product Width:
- 5.43 IN
B-LINE P3BEDH3150GN – Frequently Asked Questions
1) What amperage and breaker frame does the B-Line P3BEDH3150GN plug-in unit use?
The P3BEDH3150GN is a 150 A plug-in unit built on Eaton's E frame, which covers 15 through 225 A. So if your tap needs more than 225 A you are outside this frame entirely and need a larger-frame plug-in unit.
2) Will a 100 kAIC plug-in unit satisfy my available fault current at 240V?
This Pow-R-Way III plug-in unit is rated 100 kAIC at 240 Vac. If your engineer's short circuit study shows available fault current at or below 100 kA on a 240 V system, the breaker is rated for the duty. Above that, or on a higher system voltage where the 100 kA figure does not apply, you need a different interrupting rating.
3) Does the P3BEDH3150GN plug-in unit include a full neutral for single-phase loads off a three-phase busway?
Yes, it is configured with a 100% rated neutral, so it carries full neutral current for line-to-neutral and nonlinear loads such as receptacle and lighting panels. Ground is a 50% internal ground, which stays inside the unit rather than requiring a separate external ground bar run.
4) How big and how heavy is the Pow-R-Way III 150 amp plug-in unit for hanging on busway?
It measures 21.2 x 12.36 x 5.43 inches and weighs 25 lb. Plan on two people or a lift for overhead busway runs, and confirm the clear working space in front of the plug-in location before you set it.
5) What is a busway plug-in unit and how is it different from mounting a breaker in a panelboard?
A plug-in unit like the P3BEDH3150GN is a breaker in an enclosure that hangs directly on a busway run and taps power at that point, so you feed a load where it sits instead of pulling a feeder back to a panelboard. Pick a plug-in unit when the load location moves or when you want tap points along an overhead run; use a panelboard when the circuits are fixed and you want them grouped on one board.
6) What exact part number do I order for the Eaton Pow-R-Way III 150 amp E frame plug-in unit?
Order it as B-Line P3BEDH3150GN. That single number carries the 150 A E frame breaker, the 100% neutral, and the 50% internal ground, so there are no separate suffixes to add for those options.
How fast can I get the B-LINE P3BEDH3150GN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE P3BEDH3150GN come with a warranty?
Absolutely. The B-LINE P3BEDH3150GN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE P3BEDH3150GN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE P3BEDH3150GN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.