You may also like
Eaton Pow-R-Way III circuit breaker plug-in unit
Manufacturer Resources
Product Specs
- Amperage Rating:
- 225A
- Circuit Breaker Frame:
- E Frame (15-225 A)
- Grounding Options:
- 50% Integral/Housing
- Interrupt Rating:
- 100 kAIC at 240 Vac
- Product Subgroup:
- circuit breaker
- Department:
- Electrical
- Product Group:
- Electrical Components
- Product Type:
- Breaker
- Product Length:
- 12.36 IN
- Product Details:
- Breaker
- Product Height:
- 21.2 IN
- Product Weight:
- 25 LB
- Product Width:
- 5.43 IN
B-LINE P3BEDH3225 – Frequently Asked Questions
1) What amperage is the B-Line P3BEDH3225 Pow-R-Way III plug-in unit rated for?
It is a 225 amp plug-in unit built on the Eaton E frame, which covers 15 through 225 amps. That puts this unit at the top of the E frame range, so if you need a tap above 225 A you are moving to a larger frame plug-in, not this one.
2) Will the P3BEDH3225 hold up on a 240 V service with high available fault current?
The unit carries a 100 kAIC interrupting rating at 240 Vac, so it is suited to services where available fault current at the busway tap is high. Confirm the calculated fault current at your tap point falls within that 100 kAIC figure at 240 V.
3) How much room do I need to mount a P3BEDH3225 plug-in unit on the busway run?
The unit measures 21.2 inches high, 12.36 inches long and 5.43 inches wide, and weighs 25 pounds. Plan your clearance along the busway and at the tap opening around those figures, and plan on a two-person lift or a mechanical assist if the run is overhead.
4) Is a busway plug-in unit the right way to feed my load, or should I run a separate panelboard feeder?
A plug-in unit like the P3BEDH3225 taps power directly off an existing Pow-R-Way III busway run and provides the overcurrent device at that point, in this case a 225 amp breaker. That is the approach when the busway is already installed above a production floor or equipment row and you want a protected tap where the load sits. If there is no busway on the job, you are looking at a panelboard and conduit feeder instead, not this.
5) What part number do I order for the 225 A E frame Pow-R-Way III plug-in unit?
The catalog number is P3BEDH3225, a B-Line branded Eaton Pow-R-Way III circuit breaker plug-in unit. Give that number to your distributor exactly as written, since the trailing 225 designates the amp rating and the E frame breaker inside.
How fast can I get the B-LINE P3BEDH3225 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE P3BEDH3225 come with a warranty?
Absolutely. The B-LINE P3BEDH3225 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE P3BEDH3225?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE P3BEDH3225 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.