You may also like
Eaton Pow-R-Way III circuit breaker plug-in unit
Manufacturer Resources
Product Specs
- Amperage Rating:
- 20A
- Circuit Breaker Frame:
- E Frame (15-225 A)
- Grounding Options:
- 50% Internal
- Interrupt Rating:
- 18 kAIC at 240 Vac, 14 kAIC at 480 Vac
- Product Subgroup:
- circuit breaker
- Department:
- Electrical
- Product Group:
- Electrical Components
- Product Type:
- Breaker
- Product Length:
- 12.36 IN
- Product Details:
- Breaker
- Product Height:
- 21.2 IN
- Product Weight:
- 25 LB
- Product Width:
- 5.43 IN
- Compliances:
- NEMA Compliant
- Certifications:
- IEEE Certified
B-LINE P3BEHD3020G – Frequently Asked Questions
1) What amperage and interrupting rating does the B-Line P3BEHD3020G busway plug-in unit provide?
The P3BEHD3020G is a 20 amp plug-in unit built around an E frame breaker, and it interrupts 18 kAIC at 240 Vac and 14 kAIC at 480 Vac. Match that AIC against the available fault current at the tap point on your busway run, not at the service entrance, before you commit to it.
2) Will this plug-in unit fit an Eaton Pow-R-Way III busway run?
Yes. The P3BEHD3020G is an Eaton Pow-R-Way III circuit breaker plug-in unit, so it plugs directly onto Pow-R-Way III bus duct. It is not a bolt-on panelboard breaker and will not mount in a load center or a different manufacturer's busway.
3) What grounding does the P3BEHD3020G plug-in unit use?
It is configured with 50 percent internal ground. If your busway run and the downstream feeder are specified for a full-size or external ground bar, this configuration will not match the drawing.
4) How big and how heavy is this 20A Pow-R-Way III plug-in unit, and can one person hang it?
It measures 21.2 x 12.36 x 5.43 inches and weighs 25 pounds. That is a two-hand lift on a ladder at bus height, so plan on a second person or a lift for overhead runs, and confirm you have the clearance along the busway for a body that size next to adjacent plugs.
5) Can I use this 20A unit as a spare for larger taps on the same busway run?
Only up to what the frame covers. The plug-in is fixed at 20 amps, though it uses the E frame that spans 15 to 225 A, so larger taps on the same run take a different plug-in unit from the same frame family rather than a change to this one. For MRO stock, carrying one unit per amp rating you actually feed is the way to standardize.
6) Is a busway plug-in unit the right choice, or should I run a branch panel instead?
A plug-in unit like the P3BEHD3020G taps power directly off the bus duct at the point of use, which suits shops, data halls, and machine lines where loads move. A panelboard makes more sense when circuits are fixed and centralized. Here you get a single 20A breaker tap with 18 kAIC at 240 Vac and 14 kAIC at 480 Vac behind it, so it covers one load, not a distribution board.
How fast can I get the B-LINE P3BEHD3020G delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE P3BEHD3020G come with a warranty?
Absolutely. The B-LINE P3BEHD3020G is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE P3BEHD3020G?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE P3BEHD3020G from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.