Eaton Power Defense Molded Cas...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$430.27
Eaton Power Defense Molded Case Circuit Breaker, Frame 2, Three-Pole, T-M (Fxd-Fxd) TU

Eaton Power Defense Molded Case Circuit Breaker, Frame 2, Three-Pole, T-M (Fxd-Fxd) TU

(No reviews yet) Write a Review

Model: PDG13C0025TFFJ

In Stock (leaves warehouse same day if ordered before 3pm ET)

$430.27
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Eaton Power Defense Molded Case Circuit Breaker, Frame 2, Three-Pole, T-M (Fxd-Fxd) TU

The Eaton Power Defense molded case circuit breaker is a globally rated, Frame 2, Three-Pole breaker built for reliable overcurrent protection in commercial and industrial power distribution systems. Configured with a T-M (Fxd-Fxd) TU thermomagnetic trip unit and rated up to 600 Vac, this Class A breaker uses standard terminals in a load-only arrangement and is RoHS compliant for environmentally responsible installations. As a complete breaker within the Power Defense platform, it is engineered to deliver dependable, code-compliant circuit protection across a range of amperage configurations.

Key Features

  • Voltage Rating: Rated up to 600 Vac (rated operation voltage Ue at AC max of 600) for use across a wide range of distribution system voltages.
  • Pole Configuration: Three-pole design for balanced protection of three-phase circuits.
  • Trip Type: T-M (Fxd-Fxd) TU thermomagnetic trip unit with fixed thermal and fixed magnetic settings for consistent, predictable tripping performance.
  • Switch-Off Technique: Thermomagnetic switching mechanism for dependable circuit interruption.
  • Breaker Class: Class A rated for standard molded case circuit breaker applications.
  • Terminals: Standard terminals, load only, simplifying termination on the load side of the circuit.
  • Frame: Frame 2 complete breaker construction as part of the Eaton Power Defense lineup.

Certifications & Compliance

  • RoHS Compliant

Technical Specifications

  • Rated operation voltage (Ue) at AC - max: 600
  • Department: Electrical
  • Circuit breaker frame type: Complete breaker
  • Number of poles: Three-pole
  • Class: Class A

Typical Applications

  • Commercial and Industrial Electrical Installations
  • Panelboard and Load Center Circuit Protection
  • Power Distribution Systems
  • Feeder and Branch Circuit Protection
  • New Construction and Electrical Retrofit Projects

Why Eaton?

Eaton's Power Defense molded case circuit breakers are engineered as complete, Class A rated breakers with thermomagnetic T-M (Fxd-Fxd) TU trip units for consistent, dependable performance. Backed by RoHS compliant construction and a 600 Vac rating, this Frame 2 Three-Pole breaker is built to support code-compliant circuit protection for demanding commercial and industrial electrical systems.

Manufacturer Resources

Product Specs

Voltage Rating:
600V
Voltage rating - max:
600 V
Circuit Breaker Frame Type:
Complete breaker
Trip Type:
T-M (Fxd-Fxd) TU
Rated operation voltage (Ue) at AC - max:
600
Switch off technique:
Thermomagnetic
Class:
Class A
Number Of Poles:
Three-pole
Compliances:
RoHS Compliant
Product Type:
Circuit Breaker
Department:
Electrical
Configuration:
3-Pole
Series:
Frame 2
Standards:
RoHS Compliant
Connection Type:
Standard Terminals
Product Group:
Circuit Protection
Product Subgroup:
Circuit Breakers

Eaton PDG13C0025TFFJ – Frequently Asked Questions

1) What amperages does the Eaton Power Defense Frame 2 three-pole breaker come in?
The Power Defense Frame 2 three-pole thermomagnetic breaker is offered at 15, 20, 25, 100, 125, 175 and 200 amperes. The lower ratings (15A, 20A, 25A) use PDG13C part numbers, while 100A through 200A use PDG23 part numbers such as PDG23M0100TFFL and PDG23F0200TFFN. Pick the amp rating off your panel schedule or feeder calculation, then confirm the interrupting rating your fault study calls for, since 200A is built in both a 25 kA and a 65 kA version.
2) Will this Eaton breaker work on a 480V three-phase system?
Yes. The Power Defense Frame 2 three-pole breaker is rated to 600 Vac maximum operating voltage, so 480Y/277 and 480 delta three-phase systems are inside its rating, as is 208Y/120. The three-pole build is intended for three-phase circuits.
3) What interrupting rating do the 200 amp versions of this Power Defense breaker have?
There are two 200A builds. PDG23F0200TFFN is the 25 kA version and PDG23M0200TFFL is the 65 kA version. The 100A, 125A and 175A breakers are all 65 kA. Match the AIC to the available fault current at the point of installation, not just the load, or the breaker is misapplied.
4) Is this a thermomagnetic or electronic trip breaker?
Thermomagnetic. The trip unit is the T-M (Fxd-Fxd) TU, meaning both the thermal (overload) and magnetic (short circuit) settings are fixed at the factory, not adjustable in the field. If your spec calls for adjustable instantaneous settings or metering and selective coordination adjustment, you need an electronic trip unit version instead, not this one.
5) Can I adjust the trip settings on this Eaton Frame 2 breaker after installation?
No. Fxd-Fxd in the T-M (Fxd-Fxd) TU designation means fixed thermal and fixed magnetic. Trip performance is set by the amp rating you order, so the amperage selection is the decision, not a dial on the face.
6) What type of terminals does this breaker use and are lugs included?
It ships with standard terminals in a load-only arrangement, so the standard termination provision is on the load side. Line side connection method depends on how you are mounting it, so plan your panel or enclosure connection accordingly before you order accessories.
7) Is the Eaton Power Defense Frame 2 breaker a complete breaker or just a trip unit?
It is a complete breaker, not a frame or trip unit sold separately. The thermomagnetic trip unit is part of the assembly, so what you order is the finished device ready to mount and terminate.
8) Does this Eaton breaker meet RoHS requirements for a government or institutional project?
The Power Defense Frame 2 three-pole breaker is RoHS compliant, which covers restricted-substance requirements common on public and institutional specifications. It is also a Class A molded case breaker, the standard classification for general molded case applications.
9) Is this breaker suitable for feeder protection or only branch circuits?
Both. With ratings from 15A up to 200A at 600 Vac, the Frame 2 three-pole line covers branch circuit protection at the low end and three-phase feeder protection at 100A to 200A, in panelboards and distribution equipment for commercial and industrial installations.
How fast can I get the Eaton PDG13C0025TFFJ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton PDG13C0025TFFJ come with a warranty?
Absolutely. The Eaton PDG13C0025TFFJ is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton PDG13C0025TFFJ?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Eaton PDG13C0025TFFJ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!